Abstract:A kind of branched block PBI proton exchange membrane (PEM) has a porphyrin ring structure for HT‐PEMFCs application. Uses low‐content porphyrin rings (<1 mol.%) as branched monomers to prepare branched PBI, maintaining a high level of PA doping and retention ability. The membranes achieve high proton conductivity and enhance fuel cell performance through the synergistic effect of phase separation of block structures and porphyrin π−π stacking. This results in a uniform distribution of high‐density helical nanochannels that through‐out the membrane, but present better chemical stability and maintains high levels of PA doping and retention ability. The membrane electrode assembly (MEA) can achieve an H2‐O2 fuel cell peak power density of 1077 mW cm−2 at 180 °C and 357 mW cm−2 at 80 °C without humidification and backpressure. High‐temperature proton‐exchange membrane fuel cells (HT‐PEMFCs) fabricated with phosphoric acid (PA)‐doped polybenzimidazole (PBI) show apparent technical advantages. In practical automotive applications, achieving cold start‐up capability is crucial. In this work, a kind of branched block proton exchange membrane (PEM) based on PBI with a low content of porphyrin ring (<1 mol.%) is reported as a branched monomer. Self‐assembly into high‐density helical nanochannels under the synergistic effect of phase separation and porphyrin π−π stacking, thus the PEM can maintain a high level of PA doping. Specifically, the PA/1.8TCPP‐BrPy‐OPBI membrane shows a proton conductivity of 0.169 and 0.071 S cm−1, as well as an H2‐O2 fuel cell peak power density of 1077 and 357 mW cm−2 at 180 and 80 °C without humidification and backpressure, respectively. The membrane electrode assembly (MEA) can exhibit good fuel cell stability, with a voltage decay rate of only 7.0 μV h−1 at 80 °C. Furthermore, it maintains a peak power density of 93% even after 150 start‐up/shut‐down cycles at 25 °C. This work expands the operating temperature range of conventional PBI membranes between 25 and 200 °C and thus provides a novel strategy for high‐performance PBI‐based HT‐PEMFCs.

Macromolecular cross-linked polybenzimidazole based on bromomethylated poly (aryl ether ketone) with enhanced stability for high temperature fuel cell applications

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Diazoniabicyclo-type Poly (ionic Liquid) Cross-Linked Polybenzimidazole Membrane with Improved Phosphoric Acid Retention for HT-PEMFCs

Cross-Linkable Polymeric Ionic Liquid Improve Phosphoric Acid Retention and Long-Term Conductivity Stability in Polybenzimidazole Based PEMs

Benzimidazole Grafted Polybenzimidazole Cross-Linked Membranes with Excellent PA Stability for High-Temperature Proton Exchange Membrane Applications

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

HT-PEMs based on carbazole grafted polybenzimidazole with high proton conductivity and excellent tolerance of phosphoric acid

Ethyl Phosphoric Acid Grafted Amino-Modified Polybenzimidazole with Improved Long-Term Stability for High-Temperature Proton Exchange Membrane Applications

Preparation and properties of epoxy-cross-linked porous polybenzimidazole for high temperature proton exchange membrane fuel cells

Gel-state Polybenzimidazole Proton Exchange Membranes with Flexible Alkyl Sulfonic Acid Side Chains for a Wider Operating Temperature Range (25–240 °C)

Cross-linked polybenzimidazole with enhanced stability for high temperature proton exchange membrane fuel cells

Novel epoxy-based cross-linked polybenzimidazole for high temperature proton exchange membrane fuel cells

Silane-crosslinked polybenzimidazole with different hydroxyl content for high-temperature proton exchange membrane

Constructing novel cross-linked polybenzimidazole network for high-performance high-temperature proton exchange membrane

Porphyrin Helical Nanochannel‐Assembled Polybenzimidazole Membranes Doped with Phosphoric Acid for Fuel Cells Operating in a Temperature Range of 25–200 °C

Stable branched polybenzimidazole high temperature proton exchange membrane: Crosslinking and pentaphosphonic-acid doping lower fuel permeability and enhanced proton transport

Polybenzimidazole Confined in Semi-Interpenetrating Networks of Crosslinked Poly (Arylene Ether Ketone) for High Temperature Proton Exchange Membrane

Highly Conductive and Mechanically Stable Imidazole-Rich Cross-Linked Networks for High-Temperature Proton Exchange Membrane Fuel Cells

Fabrication of high performance high-temperature proton exchange membranes through constructing stable cation-rich domain in polybenzimidazole membrane

Achieving high power density and excellent durability for high temperature proton exchange membrane fuel cells based on crosslinked branched polybenzimidazole and metal-organic frameworks