Abstract:The polymer/small-molecule electron donor and nonfullerene organic electron acceptor are of structural similarity with both donor and acceptor molecules consisting of polycyclic fused-ring backbone and being decorated with alkyl-chains. In this study, we report that the introduction of binary fullerenes (C60-/C70-PCBM and C60-/C70-ICBA) into a nonfullerene binary system PBDB-T:ITIC reduces the polymer-nonfullerene acceptor intermixing, obtaining higher crystallinity with (100) crystal coherence length from 28 to 29–33 nm for the ITIC, and from 14 to 20–24 nm for the PBDB-T, and improved electron and hole mobilities both. Unprecedentedly, such a protocol reduces the ITIC optical band gap from 1.59 to 1.55 eV. As consequences, higher short-circuit current-density (17.8–18.4 vs. 15.8 mA/cm2), open-circuit voltage (0.92 vs. 0.90 V) and fill-factor (0.72–0.73 vs. 0.68) are simultaneously obtained, which ultimately afford higher efficient quaternary polymer solar cells with power conversion efficiencies (PCEs) up to 12.0%–12.8% comparing to the host binary device with 9.9% efficiency. For the polymer, ITIC, and ICBA/PCBM ternary blends, 11% PCEs were recorded. The use of PCBM leads to larger red-shifting in thin film absorption and external quantum efficiency (EQE) response. Such effect is more pronounced when ICBA:PCBM mixture is used. These results indicate the size and shape of C60 and C70 as well as the substituent position of the second indene unit on C60-/C70-ICBA affect not only the blend morphology but also the electronic coupling in BHJ mixtures: the quaternary device performance increased in sequences of C70-PCBM:C70-ICBA→C70-PCBM:C60-ICBA→C60-PCBM:C70-ICBA→C60-PCBM: C60-ICBA. The resonant soft X-ray scattering (RSoXS) data indicated the most refined phase separation in the C60-PCBM:C60-ICBA based blend, corresponding to its best device function among the quaternary devices. These results indicate that the using of binary fullerenes as the acceptor additives allows for tuning nonfullerene blended film’s optical properties and film-morphologies, shedding light on the designing high-performance multi-acceptor polymer solar cells.

Efficient And Thermally Stable Polymer Solar Cells Based On A 54 Pi-Electron Fullerene Acceptor

[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

Dithienopicenocarbazole-Based Acceptors For Efficient Organic Solar Cells With Optoelectronic Response Over 1000 Nm And An Extremely Low Energy Loss

High Efficiency Polymer Solar Cells with Efficient Hole Transfer at Zero Highest Occupied Molecular Orbital Offset Between Methylated Polymer Donor and Brominated Acceptor.

13%-Efficiency Quaternary Polymer Solar Cell with Nonfullerene and Fullerene As Mixed Electron Acceptor Materials.

High-efficiency Quaternary Polymer Solar Cells Enabled with Binary Fullerene Additives to Reduce Nonfullerene Acceptor Optical Band Gap and Improve Carriers Transport

17.1 %-Efficient Eco-Compatible Organic Solar Cells From A Dissymmetric 3d Network Acceptor

Highly Efficient Polymer Tandem Cells and Semitransparent Cells for Solar Energy

A Wide-Bandgap Conjugated Polymer Based on Quinoxalino[6,5-f ]quinoxaline for Fullerene and Non-Fullerene Polymer Solar Cells

Efficient Fullerene-Free Polymer Solar Cells Based on Alkylthio Substituted Conjugated Polymers

Green‐Solvent‐Processed 17% Efficient Polymer Solar Cell Achieved Synergistically by Aligning Energy Levels and Improving Morphology with the Quaternary Strategy

Ternary Blended Fullerene‐Free Polymer Solar Cells with 16.5% Efficiency Enabled with a Higher‐LUMO‐Level Acceptor to Improve Film Morphology

A Highly Efficient Polymer Non-Fullerene Organic Solar Cell Enhanced by Introducing a Small Molecule As a Crystallizing-Agent

Highly Efficient Photovoltaics and Field-Effect Transistors Based on Copolymers of Mono-Fluorinated Benzothiadiazole and Quaterthiophene: Synthesis and Effect of the Molecular Weight on Device Performance

Efficient Post-Treatment-free Polymer Solar Cells from Indacenodithiophene and Fluorinated Quinoxaline-Based Conjugated Polymers

Highly efficient polymer solar cells based on poly(carbazole-alt-thiophene- benzofurazan)

Single‐Junction Binary‐Blend Nonfullerene Polymer Solar Cells with 12.1% Efficiency

A High‐Performance Non‐Fullerene Acceptor Compatible with Polymers with Different Bandgaps for Efficient Organic Solar Cells

A Dithienobenzothiadiazole-Quaterthiophene Wide Bandgap Polymer Enables Non-Fullerene Based Polymer Solar Cells with over 15% Efficiency

An alternating polymer with fluorinated quinoxaline and 2,7-carbazole segments for photovoltaic devices

High-Performance Ternary Nonfullerene Polymer Solar Cells with Both Improved Photon Harvesting and Device Stability.