Abstract:Graphene platelets (GnPs) are a class of novel 2D nanomaterials owing to their very small thickness (similar to 3 nm), high mechanical strength and electric conductivity (1460 S cm(-1)), and good compatibility with most polymers as well as cost-effectiveness. In this paper we present a low-cost processing technique for producing modified GnPs and an investigation of the electrical and mechanical properties of the resulting composites. After dispersing GnPs in solvent N-methyl-2-pyrrolidone, a long-chain surfactant (Jeffamine D 2000, denoted J2000) was added to covalently modify GnPs, yielding J2000-GnPs. By adjusting the ratio of GnPs to the solvent, the modified GnPs show different average thickness and thus electrical conductivity ranging from 694 to 1200 S cm(-1). To promote the exfoliation and dispersion of J2000-GnPs in a polymeric matrix, they were dispersed in the solvent again and further modified using diglycidyl ether of bisphenol A (DGEBA) producing m-GnPs, which were then compounded with an epoxy resin for the development of epoxy/m-GnP composites. A percolation threshold of electrical volume resistivity for the resulting composites was observed at 0.31 vol%. It was found that epoxy/m-GnP composites demonstrated far better mechanical properties than those of unmodified GnPs of the same volume fraction. For example, m-GnPs at 0.25 vol% increased the fracture energy release rate G(1c) from 0.204 +/- 0.03 to 1: 422 +/- 0: 24 kJ m(-2), while the same fraction of unmodified GnPs increased G(1c) to 1: 01 +/- 0: 24 kJ m(-2). The interface modification also enhanced the glass transition temperature of neat epoxy from 58.9 to 73.8 degrees C.

A Novel Approach to Electrically and Thermally Conductive Elastomers Using Graphene

Melt Compounding with Graphene to Develop Functional, High-Performance Elastomers

Electrically and Thermally Conductive Elastomer/graphene Nanocomposites by Solution Mixing

Self‐healable and reprocessible liquid crystalline elastomer and its highly thermal conductive composites by incorporating graphene via in‐situ polymerization

Mechanical, thermal, and conductivity performances of novel thermoplastic natural rubber/graphene nanoplates/polyaniline composites

Achieving High Thermal Conductivity and Satisfactory Insulating Properties of Elastomer Composites by Self-Assembling BN@GO Hybrids

The Liquid-Exfoliation of Graphene Assisted with Hyperbranched Polyethylene-G- Polyhedral Oligomeric Silsesquioxane Copolymer and Its Thermal Property in Polydimethylsiloxane Nanocomposite

Processable 3-nm thick graphene platelets of high electrical conductivity and their epoxy composites.

Electrical conductivity enhancement in thermoplastic polyurethane-graphene nanoplatelet composites by stretch-release cycles

Thermally Conductive Graphene-Polymer Composites: Size, Percolation, and Synergy Effects

Synthesis of Percolative Hyperelastic Conducting Composite and Demonstrations of Application in Wearable Strain Sensors

Evaluation of the properties of elastomeric compounds with the incorporation of graphene nanoplatelets through various mixtures processes

A Green Method for Preparing Conductive Elastomer Composites with Interconnected Graphene Network Via Pickering Emulsion Templating

Graphene nanoplatelet filled elastomer composites; influence of different matrices on the dispersion, electrical and mechanical properties

Electro‐bio‐mechanical behavior of graphite nanoplatelets–silicone rubber‐based composites for wearable electronic systems

Mechanical, electrical and thermal properties of in-situ exfoliated graphene/epoxy nanocomposites

Fabrication of conductive elastic nanocomposites via framing intact interconnected graphene networks

Elastomeric Composites Based on Carbon Nanomaterials

Deformable High Loading Liquid Metal Nanoparticles Composites for Thermal Energy Management

Enhancement of electrical conductivity of epoxy using graphene and determination of their thermo-mechanical properties

A high-performance thermally conductive and electrically insulating silver@siloxane/graphene/epoxy composites at low filler content: Fabrication, mechanism study of insulation and thermal conductivity enhancement