Abstract:A novel ladder-type dithienonaphthalene (DTN) was designed and synthesized as an electron-rich unit for constructing donor-acceptor copolymers. Different acceptor moieties, including benzo[c][1,2,5]thiadiazole (BT), 5,6-bis(hexyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole (TBT), and 2,5-bis(2-ethylhexyl)-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,SH)-dione (TDPP), were used as electron-deficient units for the target copolymers. These copolymers (PDTNBT, PDTNTBT, and PDTNTDPP) were obtained via the Stile coupling reaction and characterized by H-1 NMR spectroscopy, UV-vis absorption spectroscopy, cyclic voltammetry, and gel permeation chromatography (GPC). Owing to the four solubilizing alkyl chains on the DTN unit, all the three copolymers have good solubility in common solvents. Among these polymers, PDTNTBT exhibits the highest space-charge limit current (SCLC) hole mobility of 2.13 x 10(-5) cm(2) V-1 s(-1), which is beneficial for achieving high performance solar cells. Under the simulated AM 1.5G illumination condition (100 mW/cm(2)), solar cells based on PDTNTBT:PC71BM (1:3, w/w) exhibit a power conversion efficiency (PCE) of 4.8% with a current density of 10.3 mA cm(-2), an open-circuit voltage of 0.86 V, and a fill factor of 54%. With the same device fabrication method, PDTNTDPP:PC71BM (1:3, w/w) and PDTNBT:PC71BM (1:3, w/w) based devices exhibit efficiencies of 1.52% and 2.79%, respectively. Furthermore, inverted solar cells based on these copolymer blends are also fabricated. The inverted devices based on PDTNTDPP:PC71BM (1:2, w/w) and PDTNBT:PC71BM (1:2, w/w) exhibit PCEs of 1.60% and 2.89%, respectively, which are similar to their corresponding conventional devices. And the inverted devices based on PDTNTBT:PC71BM (1:2, w/w) show a higher PCE of 5.0%, and more importantly, they are quite stable as demonstrated by the 4.75% PCE after ambient storage for two months.

Design and synthesis of copolymers of indacenodithiophene and naphtho[1,2- c:5,6- c ]bis(1,2,5-thiadiazole) for polymer solar cells

Indacenodithiophene-based wide bandgap copolymers for high performance single-junction and tandem polymer solar cells

Theoretical investigations on donor-acceptor conjugated copolymers based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for organic solar cell applications

Thick Film Polymer Solar Cells Based on Naphtho[1,2‐c:5,6‐c]bis[1,2,5]thiadiazole Conjugated Polymers with Efficiency over 11%

Mapping Nonfullerene Acceptors with a Novel Wide Bandgap Polymer for High Performance Polymer Solar Cells

Synthesis and photovoltaic properties of D-A copolymers of benzodithiophene and naphtho[2,3-c]thiophene-4,9-dione

Acceptor–acceptor conjugated copolymers based on perylenediimide and benzothiadiazole for all‐polymer solar cells

Synthesis of D‐A copolymers based on thiadiazole and thiazolothiazole acceptor units and their applications in ternary polymer solar cells

Dithienocoronene Diimide Based Conjugated Polymers As Electron Acceptors for All-Polymer Solar Cells

Ladder-Type Dithienonaphthalene-Based Donor–Acceptor Copolymers for Organic Solar Cells

Tuning The Frontier Molecular Orbital Energy Levels Of N-Type Conjugated Copolymers By Using Angular-Shaped Naphthalene Tetracarboxylic Diimides, And Their Use In All-Polymer Solar Cells With High Open-Circuit Voltages

Synthesis and photophysical properties of N-alkyl dithieno[3,2- b:2',3'- d]pyrrole based donor/acceptor-π-conjugated copolymers for solar-cell application

Synthesis and Photovoltaic Properties of Copolymers of Carbazole and Thiophene with Conjugated Side Chain Containing Acceptor End Groups

Improved photovoltaic properties of terpolymers containing diketopyrrolopyrrole and an isoindigo side chain

Bandgap Engineering of Dual Acceptor-Containing Naphthalene Diimide Polymers for All-Polymer Solar Cells

Improved Charge Transport and Absorption Coefficient in Indacenodithieno[3,2-B]thiophene-based Ladder-Type Polymer Leading to Highly Efficient Polymer Solar Cells.

Wide-bandgap Donor Polymers Based on a Dicyanodivinyl Indacenodithiophene Unit for Non-Fullerene Polymer Solar Cells

Synthesis and photovoltaic properties of copolymers from benzodithiophene and thiazole

Naphthalenothiophene Imide-Based Polymer Donor for High-Performance Polymer Solar Cells

Synthesis of copolymers based on thiazolothiazole and their applications in polymer solar cells

Angular/linear-shaped indacenodithiophene (IDT) for donor-acceptor copolymers: Geometric shape effects on physical properties and photovoltaic performance