Abstract:The highly desirable properties of nitrogen-doped graphene nanomaterial, such as high surface area, good hydrophilicity, and enhanced electrocatalytic activity and charge-transfer property, make it an ideal candidate for electrode materials used in the field of energy conversion and storage. Up to now, methods of synthesizing nitrogen-doped graphene nanomaterials mainly include chemical vapor deposition, thermal annealing graphite oxide with NH3, and graphene treated with nitrogen plasma. However, these methods of producing the nitrogen-doped graphene nanomaterials are either costly for practical applications or involving environmently hazardous reagents, and the full potentials of nitrogen-doped graphene materials are hard to achieve without scalable production at low cost. Therefore, a simple and cost-effective method of producing the nitrogen-doped graphene nanomaterial is desirable. In this paper, nitrogen-doped graphene nanoplatelets are prepared by a simple and eco-friendly mechanochemical pin-grinding process under N2 atmosphere through using natural graphite flake as the precursor at room temperature. The as-prepared nitrogen-doped graphene sample is characterized by X-ray photoelectron spectroscopy, Raman spectra, nitrogen adsorption, SEM, and TEM. The images of SEM and BET (Brunauer-Emmett-Teller) surface area measurements demonstrate an effective and spontaneous delamination of the starting graphite into small graphene nanoplatelets even in the solid state by pin-grinding process. The cleavage of graphitic C-C bonds by pin grinding creates numerous active carbon species, which can directly react with nitrogen. X-ray photoelectron spectroscopy measurements indicate that the active carbon species react with nitrogen to form the aromatic C-N in pyrazole and pyridazine rings at the fresh broken edges of the graphitic frameworks. Both pyrrolic nitrogen and pyridinic nitrogen are at the edge of carbon framework, which can provide chemically active sites to improve the electrochemical performance of carbon material. Electrochemical impedance spectroscopy indicvates that nitrogen-doped graphene nanoplatelets possess excellent electrocatalytic activity for the redox reaction between iodide and triiodide ions, used in dye-sensitized solar cells. The charge-transfer resistance of nitrogen-doped graphene nanoplatelet electrode is 1.1 cm2, which is comparable to that of Pt electrode. The capacitance properties of the as-prepared nitrogen-doped graphene nanoplatelets are also investigated. Cyclic voltammetry and galvanostatic charge-discharge curves show that nitrogen-doped graphene nanoplatelets have good capacitive performance. At a current density of 0.3 A/cm2, the specific capacitance of nitrogen-doped graphene nanoplatelets is 202.8 F/g. The good electrochemical performance of nitrogen-doped graphene nanolplatelet can be attributed to its high surface area and doping nitrogen at the edge. The simple and eco-friendly preparation procedure, low cost, and good electrochemical performance allow the as-prepared nitrogen-doped graphene nanoplatelets to be a promising candidate for the electrode materials in dye-sensitized solar cells and supercapacitors.

Using hydroxylamine as a reducer to prepare N-doped graphene hydrogels used in high-performance energy storage

Facile preparation of nitrogen/sulfur co-doped and hierarchical porous graphene hydrogel for high-performance electrochemical capacitor

NH3 assisted photoreduction and N-doping of graphene oxide for high performance electrode materials in supercapacitors.

Purified Nitrogen-Doped Reduced Graphene Oxide Hydrogels for High-Performance Supercapacitors

Preparation of highly conductive graphene hydrogels for fabricating supercapacitors with high rate capability

Hydrothermal Synthesis of Macroscopic Nitrogen-Doped Graphene Hydrogels for Ultrafast Supercapacitor

N-Doped Graphene Quantum Dots Supported by Carbon Nanotubes Grown on Carbon Clothes for Lithium Storage

Sprinkling MnFe2O4 Quantum Dots on Nitrogen-Doped Graphene Sheets: the Formation Mechanism and Application for High-Performance Supercapacitor Electrodes

Dimethylsulfoxide-Dependent Environments for Fabricating Graphene Hydrogels for High-Performance Supercapacitor.

Nitrogen‐Doped Reduced Graphene Oxide Hydrogel Achieved Via a One‐Step Hydrothermal Process

Larger-Scale Fabrication of N-Doped Graphene-Fiber Mats Used in High-Performance Energy Storage

Three Dimensional Nitrogen-Doped and Nitrogen, Sulfur-Codoped Graphene Hydrogels for Electrode Materials in Supercapacitors

Synthesis and supercapacitor performance studies of N-doped graphene materials using o-phenylenediamine as the double-N precursor

One-step hydrothermal synthesis of N-doped graphene/poly5-hydroxyindole composite materials for supercapacitor with ultra-long cycle stability and ultra-high energy storage performance

Structure of Functionalized Nitrogen-Doped Graphene Hydrogels Derived from Isomers of Phenylenediamine and Graphene Oxide Based on Their High Electrochemical Performance

N/S co-doped three-dimensional graphene hydrogel for high performance supercapacitor

Tuning the Surface Chemical State of Graphene Oxide Sheets for the Self‐Assembly of Graphene Hydrogel for Capacitive Energy Storage

Facile and Tunable Synthesis of Nitrogen-Doped Graphene with Different Microstructures for High-Performance Supercapacitors

Preparation of nitrogen and sulfur co-doped graphene aerogel with hierarchical porous structure using ionic liquid precursor for high-performance supercapacitor

Preparation and Electro Chemical P Erformance of Nitrogen-Dop Ed Graphene Nanoplatelets

Facile Synthesis of Nitrogen/Sulfur Co-doped Three-Dimensional Holey Graphene Hydrogels for High Supercapacitive Performance