Abstract:Carbon nanotube (CNT) is a promising electrode material and has been used as an anode modifier in microbial fuel cells (MFCs). In this study, a new method of simultaneously adding CNT powders and Geobacter sulfurreducens into the anode chamber of a MFC was used, aiming to form a composite biofilm on the anode. The performance of MFCs such as startup time and steady-state power generation was investigated under conditions of different CNT powders dosages. Results showed that both the startup time and the anodic resistance were reduced. The optimal dosage of CNT powders pre-treated by acid was 4mg/mL for the anode chamber with an effective volume of 25mL. The anodic resistance and output voltage of the MFC with CNT powders addition were maintained around 180Ω and 650mV during 40 days operation, while those of the MFC without CNT powders addition increased from 250Ω to 540Ω and decreased from 630mV to 540mV, respectively, demonstrating that adding CNT powders helped stabilize the anodic resistance, thus the internal resistance and power generation during long-term operation. Based on cyclic voltammogram, the electrochemical activity of anodic biofilm was enhanced by adding CNT powders, though no significant increase of the biomass in anodic biofilm was detected by phospholipids analysis. There was no remarkable change of ohmic resistance with an addition of CNT powders revealed by current interrupt method, which indicated that the rate of mass transfer might be promoted by the presence of CNT powders.

Carbon Nanotube-Coated Stainless Steel Mesh for Enhanced Oxygen Reduction in Biocathode Microbial Fuel Cells

Manganese Dioxide-Coated Carbon Nanotubes As an Improved Cathodic Catalyst for Oxygen Reduction in a Microbial Fuel Cell

Stainless steel mesh coated with MnO 2/carbon nanotube and polymethylphenyl siloxane as low-cost and high-performance microbial fuel cell cathode materials

Bimetallic hybrids modified with carbon nanotubes as cathode catalysts for microbial fuel cell: Effective oxygen reduction catalysis and inhibition of biofilm formation

Control of Geometrical Properties of Carbon Nanotube Electrodes Towards High-Performance Microbial Fuel Cells

Carbon Nanotube/Chitosan Nanocomposite As A Biocompatible Biocathode Material to Enhance the Electricity Generation of A Microbial Fuel Cell

Carboxylic Carbon Nanotube: Catalyst Support Material And Oxygen Reduction Reaction Of Microbial Fuel Cells

Carbon nanotubes encapsulating FeS2 micropolyhedrons as an anode electrocatalyst for improving the power generation of microbial fuel cells

Carbon nanotube-coated macroporous sponge for microbial fuel cell electrodes

Nitrogen-Doped Carbon Nanotubes As Efficient and Durable Metal-Free Cathodic Catalysts for Oxygen Reduction in Microbial Fuel Cells

Cellular Scaffolds Based on Multiwalled Carbon Nanotubes Interpenetrating Conductive Metal-Organic Frameworks As Efficient Eelectrocatalysts in Microbial Fuel Cells

Carbon Nanotubes Conjugated Mesoporous Tungsten Trioxide As Anode Electrocatalyst for Microbial Fuel Cells

High-Capacitance Manganese Dioxide Oxide/Carbon Nanotube/Carbon Felt as a Bioanode for Enhanced Energy Output in Microbial Fuel Cells

Enhanced Electrochemical Performance in Microbial Fuel Cell with Carbon Nanotube/nicoal-Layered Double Hydroxide Nanosheets As Air-Cathode

Carbon nanotube powders as electrode modifier to enhance the activity of anodic biofilm in microbial fuel cells.

3D Hierarchical Co8FeS8-FeCo2O4/N-CNTs@CF with an Enhanced Microorganisms-Anode Interface for Improving Microbial Fuel Cell Performance

Porous -Fe<sub>2</sub>O<sub>3</sub> nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell

Promoting the Anode Performance of Microbial Fuel Cells with Nano-Molybdenum Disulfide/carbon Nanotubes Composite Catalyst

A Novel Stainless Steel Mesh/cobalt Oxide Hybrid Electrode for Efficient Catalysis of Oxygen Reduction in a Microbial Fuel Cell.

Three-dimensional Carbon Nanotube-Textile Anode for High-Performance Microbial Fuel Cells.

Titanium Dioxide Thin Film-Modified Stainless Steel Mesh for Enhanced Current-Generation in Microbial Fuel Cells