Abstract:The inherent disadvantages of carbon-based anodes, including their low hydrophilicity, significant charge transfer resistance, and limited power density, hinder their widespread commercial utilization in microbial fuel cells (MFC). Addressing these challenges, this study involved the surface modification of a carbon-based anode. To improve the adhesion of electroactive microorganisms (EAM) on the anode surface and increase the extracellular electron transfer rate, CNT@Ti 3 C 2 T x MXene was applied to the surface of carbon cloth (CC) using drip coating. Initially, we conducted a comprehensive investigation on the optimal amount of modification required. To achieve this, we designed four distinct groups of modified electrodes. Through electrochemical analysis and phase characterization, it was determined that a modification dosage of 1.5 mg/cm 2 for CNT@Ti 3 C 2 T x MXene/CC electrodes yielded the most optimal electrical conductivity and the highest capacitance. The Rs of CC is reduced from 1.48 to 0.55 Ω and the Rct from 2.62 to 2.09 Ω, and the capacitance is increased from 3.98 10 −07 F to 9.11 10 −06 F . Subsequently, the CNT@Ti 3 C 2 T x MXene/CC with a modification of 1.5 mg/cm 2 was used as the anode of the microbial fuel cell. The modification of CNT@Ti 3 C 2 T x MXene improved the power generation performance. The maximum output voltage of the MFC was increased from 546 to 709 mv, and the power density was increased from 44.9 to 101.8 mW/m 2 . The underlying factor lies in the ability of CNT@Ti 3 C 2 T x MXene/CC to significantly lower the internal resistance within the microbial fuel cell, thereby fostering the development of biofilm. Notably, our observations revealed that the biofilm formation was particularly facilitated on the anode surface of CNT@Ti 3 C 2 T x MXene/CC. In essence, the CNT@Ti 3 C 2 T x MXene-modified carbon cloth not only minimizes internal resistance but also enhances the electroactive surface area, exhibiting superior electrical conductivity. These attributes make it an advantageous material for biological applications.

Carbon nanotube-coated macroporous sponge for microbial fuel cell electrodes

Improving Microbial Fuel Cell Performance Using Porous Capacitive Composite Bioanode Materials with Energy Storage Function

High‐Performance Carbon Anode Derived from Sugarcane for Packed Microbial Fuel Cells

3D Porous Sponge/Carbon Nanotube/Polyaniline/Chitosan Capacitive Bioanode Material for Improving the Power Generation and Energy Storage Performance of Microbial Fuel Cells

N-Doped Carbon Nanowire-Modified Macroporous Carbon Foam Microbial Fuel Cell Anode: Enrichment of Exoelectrogens and Enhancement of Extracellular Electron Transfer

Three-dimensional Carbon Nanotube-Textile Anode for High-Performance Microbial Fuel Cells.

Improved Microbial Fuel Cell Performance by Encapsulating Microbial Cells with a Nickel-Coated Sponge

Ablation of bone and polymethylmethacrylate by an XeCl (308 nm) excimer laser

Pore‐Matched Sponge for Microorganisms Pushes Electron Extraction Limit in Microbial Fuel Cells

Carbon Nanotube/Chitosan Nanocomposite As A Biocompatible Biocathode Material to Enhance the Electricity Generation of A Microbial Fuel Cell

High-Capacitance Manganese Dioxide Oxide/Carbon Nanotube/Carbon Felt as a Bioanode for Enhanced Energy Output in Microbial Fuel Cells

Heteroatom-doped porous carbon nanoparticle-decorated carbon cloth (HPCN/CC) as efficient anode electrode for microbial fuel cells (MFCs)

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Three‐dimensional N‐doped carbon nanotube/graphene composite aerogel anode to develop high‐power microbial fuel cell

Enhanced performance of a microbial fuel cell using CNT/MnO2 nanocomposite as a bioanode material.

Carbon nanotube powders as electrode modifier to enhance the activity of anodic biofilm in microbial fuel cells.

A novel layer-by-layer self-assembled carbon nanotube-based anode: Preparation, characterization, and application in microbial fuel cell

CNT@Ti3C2TxMXene Nanocomposite Catalysts as Anodes to Improve the Electricity Production Performance of Microbial Fuel Cells

High-Power Microbial Fuel Cells Based on a Carbon-Carbon Composite Air Cathode.

Tubular Membrane Cathodes for Scalable Power Generation in Microbial Fuel Cells.

Carbon nanofiber/graphene hybrids anchoring Fe, N, S heteroatoms simultaneously enhancing extracellular electron transfer and biofilm adhesion in microbial fuel cells