Abstract:The property differences between equiaxed alpha particles and the beta matrix is a dominative factor for the micro -structural evolution of metastable-beta Ti alloys with bimodal microstructures during subtransus processing. For example, the deformation mismatching between two phases will result in extra work hardening and thus impacting the activation of softening mechanisms within beta phase. However, these special mechanisms are hitherto rarely clarified due to the lack of understanding into the interactions between alpha/beta phases in a wide subtransus processing range. In this work, the extra work hardening and activation of softening mechanisms induced by the alpha-beta interactions in a wide subtransus range of 745 degrees C-820 degrees C and 0.001 s- 1-1 s-1 of a bimodal metastable-beta Ti-55531 alloy were studied. Result indicated that variant softening mechanisms including the dynamic recovery, continuous dynamic recrystallization, and discontinuous dynamic recrystallization were activated within beta matrix under different processing domains. The fraction, size, and deformability of alpha particles dominated the extra work hardening and activation of softening mechanisms within beta phase by controlling the local storage of geometrically necessary dislocations, formation of subgrains, nucleation, and boundary migra-tion. Moreover, the adiabatic temperature rise under high strain rates indirectly influenced the work hardening activation of softening mechanisms. It is achieved not only by influencing the deformation mismatching, but also by inducing a newly found mechanism of selective alpha ->beta phase transformation. Furthermore, microstructural evolution mechanism maps of metastable-beta Ti alloys in a wide subtransus range were established for the in-struction on the microstructure controlling like the distribution and orientation of alpha phase, and the subgrain size and uniformity of beta phase, etc.

β Growth kinetics from α peritectic melting of oxide films

Unexpected Metastable Transition in High Superheating State

Real-time observation of the melting process of YBCO thin film on MgO substrate

Superheating and Melting Mechanisms of YBa2Cu3O7−x Surfaces

Microstructure selection during the directionally peritectic solidification of Ti–Al binary system

Peritectic Melting of Thin Films, Superheating and Applications in Growth of Rebco Superconductors

In-plane Orientation Effect on the Melting Behaviour of YBCO Thin Film.

In-situ XRD study on the peritectic reaction of YBCO thin film on MgO substrate

Substrate effect on thermal stability of superconductor thin films in the peritectic melting

Microstructure Evolution and Growth Behaviors of Faceted Phase in Directionally Solidified Al-Y Alloys Ii. Microstructure Evolution of Directionally Solidified Al-53%Y Peritectic Alloy

The preferred orientation study on YBCO thin film during its peritectic reaction

Controllable Phase Formation and Physical Properties of Yttrium Oxide Films Governed by Substrate Heating and Bias Voltage

Exploiting Kinetics And Thermodynamics To Grow Phase-Pure Complex Oxides By Molecular-Beam Epitaxy Under Continuous Codeposition

a-b Alignment influence on the thermal stability of YBCO thin film

In-situ investigation of β/α transformation in β-solidifying γ-TiAl alloys at different cooling rates

Thermal stability and phase transformation of $α$-, $κ(ε)$-, and $γ$-Ga$_2$O$_3$ thin films to $β$-Ga$_2$O$_3$ under various ambient conditions

Microstructure Evolution of Ti-(44-50)Al Alloys During Directional Peritectic Solidification

Formation mechanism of lamellae during ¡ transformation in polycrystalline dual-phase Ti alloys

Morphological evolution of Pt-films on sapphire and quartz substrates at various temperatures: An experimental and molecular dynamics study

Extra Work Hardening and Activation of Softening Mechanisms Induced by Α-Β Interactions of a Metastable-Β Ti Alloy During Subtransus Processing

Liquid migration and peritectic transformation: Investigation on their contributions to growth of peritectic phase in interrupted directional solidification