Abstract:Based on the AFM-bending experiments, a molecular dynamics (MD) bending simulation model is established which could accurately account for the full spectrum of the mechanical properties of NWs in a double clamped beam configuration, ranging from elasticity to plasticity and failure. It is found that, loading rate exerts significant influence to the mechanical behaviours of nanowires (NWs). Specifically, a loading rate lower than 10m/s is found reasonable for a homogonous bending deformation. Both loading rate and potential between the tip and the NW are found to play an important role in the adhesive phenomenon. The force versus displacement (F–d) curve from MD simulation is highly consistent in shapes with that from experiments. Symmetrical F–d curves during loading and unloading processes are observed, which reveal the linear-elastic and non-elastic bending deformation of NWs. The typical bending induced tensile-compressive features are observed. Meanwhile, the simulation results are excellently fitted by the classical Euler–Bernoulli beam theory with axial effect. It is concluded that, axial tensile force becomes crucial in bending deformation when the beam size is down to nanoscale for double clamped NWs. In addition, we find shorter NWs will have an earlier yielding and a larger yielding force. Mechanical properties (Young’s modulus and yield strength) obtained from both bending and tensile deformations are found comparable with each other. Specifically, the modulus is essentially similar under these two loading methods, while the yield strength during bending is observed larger than that during tension.

Investigation of the Nanomechanical Properties of Β-Si3n4 Nanowires under Three-Point Bending Via Molecular Dynamics Simulation.

In Situ Observation of High Bending Strain Recoverability in Au Nanowires

Mechanical properties of Si nanowires as revealed by in situ transmission electron microscopy and molecular dynamics simulations.

Dynamics behavior and defects evolution of silicon nitride nanowires under tension and compression load: A molecular dynamics study

Tensile Properties of Si Nanowires with Faulted Stacking Layers

Lattice Bending, Disordering, and Amorphization Induced Plastic Deformation in a SiC Nanowire

Nanobending of Nanowires: A Molecular Dynamics Study

Surface Deformation-Dependent Mechanical Properties of Bending Nanowires: an Ab Initio Core-Shell Model

In situ nanomechanical measurement of Cu nanowires

Atomistic Simulations Of The Mechanical Properties Of Silicon Carbide Nanowires

Investigation of the Bending Behavior in Silicon Nanowires: A Nanomechanical Modeling Perspective

A Molecular Dynamics Study Of The Si-Nanowire@Carbon-Nanotube Nanocomposite With Sp(3) Interfacial Bonding

Atomic mechanisms governing the elastic limit and the incipient plasticity of bending Si nanowires.

Three-point Bending Young's Modulus of Nanowires

Theoretical and numerical investigation of bending properties of Cu nanowires

Effect of Different Oxide Thickness on the Bending Young'S Modulus of Sio2@Sic Nanowires

Molecular Dynamics Simulation Ofβ-Sic Nanowire under Uniaxial Tension

Atomistic Simulation of the Mechanical Behavior of Ni3al Nanowires

Molecular dynamics simulation on the buckling behavior of silicon nanowires under uniaxial compression

Uniaxial-stress Effects on Electronic Properties of Silicon Carbide Nanowires