Abstract:High temperature proton exchange membrane fuel cells (HT-PEMFCs) can operate over 100 °C without humidification, which avoids the catalyst poisoning and enhances the efficiency of the power conversion. However, the classic phosphoric acid (PA) doped polybenzimidazole (PBI) still remains the challenge in the trade-off between mechanical strength and proton conductivity. The γ-(2,3-epoxypropoxy) propyltrimethoxysilane (KH560), as a crosslinking agent, is widely used to improve the mechanical properties of membranes. Although it can enhance the mechanical strength of PBI membranes, it sacrifices the hydrogen of imidazole groups, resulting in a decrease in proton conductivity. In this present work, silane-crosslinked PBI proton exchange membranes (PEMs) were synthesized by the reaction between the pyridine-bridged PBI containing different hydroxyl (-OH) content with KH560. Through comprehensive structural characterization of the polymer and model compound, it has been determined that this crosslinking method does not compromise the N–H acidic sites on the imidazole ring. The crosslinking agent KH560 provides additional hydroxyl groups to PBI and participates in the construction of hydrogen bonding networks after the ring-opening reaction. It was found that the addition of pyridine and hydroxyl groups could promote the phosphoric acid uptake, and the appropriate degree of silane crosslinking could maintain the PBI membranes with reasonable mechanical properties. Proton conductivity and HT-PEMFCs performance of the obtained crosslinked films were further enhanced with the dimensional stability, thermal stability and mechanical properties. Among them, CPyOPBI–OH–20 presented the best overall performance, exhibiting the highest proton conductivity of 0.095 S cm−1 and the maximum power density of 767 mW cm−2 at 180 °C under the anhydrous condition, which was 4.2 times that of OPBI (182 mW cm−2).

Silane-Cross-Linked Polybenzimidazole With Improved Conductivity For High Temperature Proton Exchange Membrane Fuel Cells

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Benzimidazole Grafted Polybenzimidazole Cross-Linked Membranes with Excellent PA Stability for High-Temperature Proton Exchange Membrane Applications

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Ethyl Phosphoric Acid Grafted Amino-Modified Polybenzimidazole with Improved Long-Term Stability for High-Temperature Proton Exchange Membrane Applications

Cross-Linkable Polymeric Ionic Liquid Improve Phosphoric Acid Retention and Long-Term Conductivity Stability in Polybenzimidazole Based PEMs

Diazoniabicyclo-type Poly (ionic Liquid) Cross-Linked Polybenzimidazole Membrane with Improved Phosphoric Acid Retention for HT-PEMFCs

Silane-crosslinked polybenzimidazole with different hydroxyl content for high-temperature proton exchange membrane

Cross-linked polybenzimidazole with enhanced stability for high temperature proton exchange membrane fuel cells

Preparation and properties of epoxy-cross-linked porous polybenzimidazole for high temperature proton exchange membrane fuel cells

Polybenzimidazole (Pbi)-Functionalized Silica Nanoparticles Modified PBI Nanocomposite Membranes for Proton Exchange Membranes Fuel Cells

Constructing novel cross-linked polybenzimidazole network for high-performance high-temperature proton exchange membrane

Macromolecular cross-linked polybenzimidazole based on bromomethylated poly (aryl ether ketone) with enhanced stability for high temperature fuel cell applications

Highly proton-conductive and low swelling polymeric membranes achieved by hydrophilic covalent cross-linking

Sulfonated Polyphosphazene-Blended Self-Cross-Linked Polybenzimidazole-Based High-Temperature Proton Exchange Membranes: High Efficiency in Proton Transport at Low Humidity

Highly Conductive and Mechanically Stable Imidazole-Rich Cross-Linked Networks for High-Temperature Proton Exchange Membrane Fuel Cells

Polyelectrolyte Composite Membranes of Polybenzimidazole and Crosslinked Polybenzimidazole-Polybenzoxazine Electrospun Nanofibers for Proton Exchange Membrane Fuel Cells

Novel epoxy-based cross-linked polybenzimidazole for high temperature proton exchange membrane fuel cells

Construction of High-Performance, High-Temperature Proton Exchange Membranes through Incorporating SiO2 Nanoparticles into Novel Cross-linked Polybenzimidazole Networks

Arylether-type polybenzimidazole-based composites containing imidazole-substituted heteropolyacid salts for high-temperature proton exchange membrane fuel cells