Abstract:In this work, a high-energy ball mill technique is designed to deal with bulk precursors and achieve particle size minimization. A large amount of the nano-sized precursor is achieved in a narrow particle size distribution of ca. 95 nm. We confirm that the dimensional size of the precursor has a significant influence on the final LiFePO4 particle size and that small grains of the precursor probably form single-crystalline nanoparticles during the calcination process. After carbothermal reduction, the carbon-coated single-crystalline LiFePO4 nanocomposites (nano-CS–LFP) are easily synthesized. Benefiting from the decreasing particle size, the specific surface area of nano-CS–LFP is up to 48.0 m2 g−1, which implies a higher interfacial contact area between the active particles and the electrolyte, as well as an increase in its capacitance capability. Besides, cyclic voltammetry curves of nano-CS–LFP reveal a better capability of reversible reactivity and a lower polarization. Galvanostatic charge–discharge results exhibit excellent rate performance with a discharge capacity of ca. 100 mA h g−1 at 10 °C and a stable cycling property with a capacity retention of ca. 90% after 1000 cycles. In addition, the rapid charge–discharge test over 60 seconds indicates an excellent pulse performance with a high current in a short time period. The combination of the merits of carbon coating and particle size minimization is responsible for the above improvements. Finally, this facile preparation strategy is favorable for the industrial production of economical LiFePO4 materials from lab synthesis.

Size-Controlled Synthesis of Lifepo4/C Composites As Cathode Materials for Lithium Ion Batteries

Scalable Synthesis of Fe3O4/C Composites with Enhanced Electrochemical Performance As Anode Materials for Lithium-Ion Batteries

Synthesis of Size-controllable LiFePO<sub>4</sub>/C Cathode Material by Controlled Crystallization

Synthesis of LiFePO4/C Composite As a Cathode Material for Lithium-Ion Battery by a Novel Two-Step Method

Synthesis and Characterization of LiFePO4 Nanoparticle/Mesoporous Carbon Composites As High-Power Cathode Materials for Lithium-Ion Batteries

Submicron-Sized Clusters of Lifepo4-C Nanoparticles for Lithium-Ion Battery Cathodes

Carbon-coated Single-Crystalline LiFePO4 Nanocomposites for High-Power Li-ion Batteries: the Impact of Minimization of the Precursor Particle Size

Synthesis of Microspherical LiFePO4-Carbon Composites for Lithium-Ion Batteries

Controlled Crystallization Synthesis of Porous FePO4·3H2O Micro-Spheres for Fabricating High Performance LiFePO4/C Cathode Materials

Preparation and properties of LiFePO4/C composite materials with Fe2O3 as starting reactant

Size and shape control of LiFePO4 nanocrystals for better lithium ion battery cathode materials

In Situ Synthesis and Properties of Carbon-Coated Lifepo4 As Li-Ion Battery Cathodes

Size Controlled Synthesis of Uniform Li2mnsio4 Nanospheres and Their Electrochemical Behaviors in Lithium-Ion Batteries

Inorganic-based Sol–gel Synthesis of Nano-Structured LiFePO 4 /C Composite Materials for Lithium Ion Batteries

An Efficient Process to Fabricate Spherical Hierarchical LiFePO4/C Cathode Composites with Controllable Coating Thickness

Spherical nanoporous LiCoPO4/C composites as high performance cathode materials for rechargeable lithium-ion batteries

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Synthesis of Nano-Sized FePO4 Cathode Material via a Microemulsion Technique

Synergetic Effect of the Crystallinity, Particle Size of LiFePO4 and the In-Situ Introduced Fe2P on Its High-Rate Capability

Bio-Synthesis Of Lifepo4/C Composites For Lithium Ion Battery

Synthesis of submicron-sized LiNi0.5Co0.2Mn0.3O2 cathode particles via reverse microemulsion method: Tailoring size, interfacial properties, and enhanced electrochemical performance for lithium-ion battery