Abstract:The poly(ethylene terephthalate) (PET)/isotactic polypropylene (iPP) in situ microfibrillar blends have been prepared through a “slit die extrusion–hot stretch–quenching” process, in which PET assumes microfibrils with 0.5–15μm in diameter depending on the hot stretching ratios (HSR, the area of the transverse section of the die to the area of the transverse section of the extrudate). The injection molded specimens of virgin iPP and the PET/iPP blends were prepared by conventional injection molding (CIM) and by shear controlled orientation injection molding (SCORIM), respectively. The effect of shear stress and PET phase with different shape on superstructures and their distribution of injection molded microfibrillar samples were investigated by means of small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS). The shear (or elongational) flow during CIM and SCORIM can induce oriented lamellae (i.e. kebabs induced by shish). The shish-kebab structure appears not only in the skin and intermediated layers of CIM samples, but also in the whole region of SCORIM samples. For the neat iPP samples, a more “stretched” shish-kebab structure with higher orientation degree can be obtained in the interior region (intermediate and core layers) by the SCORIM method; moreover, the SCORIM can result in the growth of β-form crystal both in intermediate layer and in core layer, which only appears in intermediate layer of the neat iPP samples obtained by CIM. For the PET/iPP blends, interestingly, the addition of microfibrils as well as their aspect ratios can affect the orientation degree of kebabs only in the intermediate layers, and the addition of microfibrils with a low aspect ratio can bring out a considerable increase in the orientation degree of kebabs along the flow direction. However, for the SCORIM, the addition of microfibrils seems to be a minor effect on the orientation degree of kebabs, and it tends to hamper the formation of a more “stretched” shish-kebab structure and suppresses the growth of β-form crystal distinctly. Furthermore, It appears from experiment that γ-form crystals can grow successfully in this oriented iPP melt with the synergistic effect of shear and pressure only when the growth of β crystals can be restrained by some factors, such as the PET dispersed phase and thermal conditions (cooling rate).

Unusual Hierarchical Structures of Mini-Injection Molded Isotactic Polypropylene/Ultrahigh Molecular Weight Polyethylene Blends

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Investigation on the Effects of MXene and Β-Nucleating Agent on the Crystallization Behavior of Isotactic Polypropylene

Exploring the Effects of MXene on Nonisothermal Crystallization and Melting Behavior of Β-Nucleated Isotactic Polypropylene

Effects of Different Ultrahigh Molecular Weight Polyethylene Contents on the Formation and Evolution of Hierarchical Crystal Structure of High‐density Polyethylene/ultrahigh Molecular Weight Polyethylene Blend Fibers

Epitaxial Crystallization and Oriented Structure of Linear Low-Density Polyethylene/Isotactic Polypropylene Blends Obtained Via Dynamic Packing Injection Molding

Crystalline Morphology of Isotactic Polypropylene (ipp) in Injection Molded Poly(Ethylene Terephthalate) (pet)/ipp Microfibrillar Blends

Lamellar Orientation in the Blends of Linear Low Density Polyethylene and Isotactic Polypropylene Induced by Dynamic Packing Injection Molding

Morphological Distribution in Micro-Injected Polypropylene Parts in the Presence of Β-Nucleating Agent

Critical Content of Ultrahigh-Molecular-Weight Polyethylene to Induce the Highest Nucleation Rate for Isotactic Polypropylene in Blends

Unique crystal morphology and tensile properties of injection-molded bar of LLDPE by adding HDPE with different molecular weights

Transition from the Hierarchical Distribution to a Homogeneous Formation in Injection Molded Isotactic Polypropylene (ipp) with Dynamic Mold Temperature Control

Morphology and Plastic Yielding of Ultrahigh Molecular Weight Polyethylene

Melt Processing and Structural Manipulation of Highly Linear Disentangled Ultrahigh Molecular Weight Polyethylene

Hierarchical structure manipulation of UHMWPE/HDPE fibers through in-reactor blending with Cr/V bimetallic catalysts

Nanostructure Evolution of Isotropic High-Pressure Injection-Molded Uhmwpe During Heating

Formation and Distribution of the Mesophase in Ultrasonic Micro-Injection-Molded Isotactic Polypropylene

Shear-induced epitaxial crystallization in injection-molded bars of high-density polyethylene/isotactic polypropylene blends

Morphology and Properties of Injection Molded Microcellular Poly(Ether Imide) (pei)/polypropylene (pp) Foams

Multilayered Core–shell Structure of the Dispersed Phase in High‐impact Polypropylene

Effect of small amount of ultra high molecular weight component on the crystallization behaviors of bimodal high density polyethylene