Abstract:Dyes are intensively used in textile and dyeing industries, and substantial volumes of organic wastewater with residual dye require treatment before discharges to public waterways. Flotation separation is an efficient and widely used method for the treatment of massive organic dye wastewaters. The key scientific problems for dye flotation separation lie in the mineralization transformation of dissolved dye to tangible flocs. In this work, a high-efficiency removal of hazardous azo dye Congo red (CR) from simulated wastewaters via metal ions chelation flocculation followed by flotation separation was proposed. It's demonstrated that CR can be chelated by the trivalent metal ions, including Al(III), Fe(III), and its mixture to form hydrophobic flocs, and then the flocs were efficiently removed via flotation in a microbubble column. The effects of chelation flocculation and flotation separation conditions on the removal efficiencies of CR, COD, and chromaticity from CR simulated wastewaters were optimized. Chelation effect of CR by trivalent metal ions was in this order: Al(III)+Fe(III)>Fe(III)>Al(III). The chelation mechanism suggested that CR molecules gradually changed from hydrazones to electronegative azo with the increase of pH to 6-7, and electrostatic attraction between the Al3(OH)45+ or Fe(OH)2+ with the CR was favorable for the chelation reaction, in which the metal ions chelated with N atoms on naphthalene ring and amino groups of CR. Over 99% CR was removed under the optimal chelation and flotation conditions: chelation by composite Al(III)/Fe(III) with a concentration of 25 mg/L at pH of 7 for 25min; followed by flotation with SDS concentration of 20 mg/L and air flow rate of 50 mL/min for 20min. Under this condition, the COD and chromaticity removal efficiency were over 96% and 98%, respectively, and the turbidity was lower than 0.1 NTU, meeting the water discharge requirement. Eventually, resourceful utilization of flotation sludge via calcination was conducted to prepare Al-Fe spinel refractory material.

Low-temperature hydrothermal synthesis of α-Fe/Fe3O 4 nanocomposite for fast Congo red removal

Facile Synthesis of Fe,Co/Fe3O4 Nanocomposite and Its Magnetic Properties and Removal Ability for Congo Red

Facile preparation of Fe2O3 Al2O3 composite with excellent adsorption properties towards Congo red

Synthesis of tannic acid based composite for efficient Congo red removal: Isotherm, kinetics, and thermodynamic studies

Synthesis of Magnetic Separable Iron Oxide/carbon Nanocomposites for Efficient Adsorptive Removal of Congo Red

Fabrication of an Fe-Doped ZIF-67 Derived Magnetic Fe/Co/C Composite for Effective Removal of Congo Red

Facile Additive-Free Synthesis of Iron Oxide Nanoparticles for Efficient Adsorptive Removal of Congo Red and Cr(VI)

Tetraethylenepentamine modified magnetic cellulose nanocrystal composites for removal of Congo red with high adsorption capacity

Synthesis of MgAl-LDH/CoFe2O4 and MgAl-CLDH/CoFe2O4 nanofibres for the removal of Congo Red from aqueous solution

Magnetically separable Co0.6Fe2.4O4/MIL-101-NH2 adsorbent for Congo red efficient removal

A Solvothermal Method to Produce RGO-Fe3O4 Hybrid Composite for Fast Chromium Removal from Aqueous Solution

High-concentration Organic Dye Removal Using Fe2O3.3.9MoO(3) Nanowires As Fenton-like Catalystst

Study on the removal of hazardous Congo red from aqueous solutions by chelation flocculation and precipitation flotation process

Amino-modified γ-Fe2O3/sepiolite composite with rod-like morphology for magnetic separation removal of Congo red dye from aqueous solution

Hydrothermal synthesis of porous alpha-Fe2O3 nanostructures for highly efficient Cr(VI) removal

Easily recyclable magnetic polyacrylamide/sodium alginate/Fe3O4@ZIF-8 hydrogel beads for effective removal of Congo Red

Fabrication and Characterization of Highly Porous Fe(Oh)(3)@Cellulose Hybrid Fibers for Effective Removal of Congo Red from Contaminated Water

Improved Adsorption of Congo Red by Nanostructured Flower-Like Fe(II)-Fe(III) Hydroxy Complex.

Preparation of a Hierarchical Flower-Like Γ-Al2o3@c Composite Exhibiting Enhanced Adsorption Performance for Congo Red by High Temperature Transformation of Γ-Alooh@c Precursors

An Innovative and Efficient Strategy for Removing Congo Red Using Magnetic Hollow Zn/Co Zeolitic Imidazolate Framework Composite

Application of 3D magnetic nanocomposites: MXene-supported Fe3O4@CS nanospheres for highly efficient adsorption and separation of dyes