Abstract:VO2 nanobelts with metal–semiconductor properties were prepared through low temperature hydrothermal reaction and post annealing. X-Ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), differential scanning calorimetry (DSC) and UV-vis-NIR spectrophotometry were employed to investigate the evolution of structure, morphology and properties of the VO2 nanobelts. The results illustrate that the pure VO2 (B) nanobelts can be obtained by hydrothermal reaction. The shape of the nanobelts evolves with hydrothermal temperature, time and reactant concentration. With the increasing of hydrothermal temperature from 160 °C to 200 °C, the nanobelts become homogenous and regular. The regular nanobelts are also obtained by the decrease of V2O5 concentration. Samples prepared at 200 °C over 48 h have superior morphology and crystallinity. After annealing, VO2 (B) can be transformed into VO2 (M), which is dependent on the hydrothermal conditions. Samples prepared at 160 °C over 48 h and 180 °C over 48 h can be transformed into VO2 (M) at 450 °C over 2 h, while samples obtained at 200 °C over 48 h should be annealed at 500 °C for 2 h. The nanobelts are transformed into irregular nanostructures, nanorods and nanobelts at the hydrothermal temperatures of 160 °C, 180 °C and 200 °C, respectively. However, samples prepared at 200 °C over 48 h with a V2O5 concentration of 0.0125 M can keep the intact nanobelts after annealing. The DSC analysis proves that the VO2 (M) shows good phase transition behavior around 68 °C and the phase transition temperature can be reduced to 58 °C by 0.5 at% tungsten doping. After mixing the VO2 (M) with acrylic resin, the visible transmission of the VO2 composite coating on glass is up to 52.2% and the solar modulation at 2000 nm is up to 31.5%, which means that it is a good candidate for smart windows.

A Facile Process to Prepare One Dimension VO2nanostructures with Superior Metal–semiconductor Transition

VO2(M) Nanoparticles with Controllable Phase Transition and High Nanothermochromic Performance

Preparation Of Tungsten-Doped Vo2 (M) Nanoparticles Through Sol-Gel Method And Hydrothermal Synthesis

Simple Method Preparation for Ultrathin VO2 Thin Film and Control: Nanoparticle Morphology and Optical Transmittance

Synthesis of VO2(A) nanostructures by a hydrothermal method and their transition to VO2(M)

From Vo2 (B) To Vo2 (A) Nanobelts: First Hydrothermal Transformation, Spectroscopic Study And First Principles Calculation

Hydrothermal Synthesis and Phase Transition Properties of Uniform Free-standing Vanadium Dioxide Nanowires

A Facile Method for Preparing Vo2 Nanobelts

Snowflake-Like Monoclinic VO2 Powders: Hydrothermal Synthesis, Characterization and In Situ Monitoring Phase-Transition Behavior

A liquid approach for the synthesis of M phase VO2 nanocrystals: Facile synthesis, characterization and reaction mechanism

Effects of Porous Nano-Structure on the Metal–insulator Transition in VO2 Films

Synthesis Of Vo2(A) Nanobelts By The Transformation Of Vo2 (B) Under The Hydrothermal Treatment And Its Optical Switching Properties

One-Step Hydrothermal Synthesis of W-Doped VO2 (M) Nanorods with a Tunable Phase-Transition Temperature for Infrared Smart Windows

One-pot Hydrothermal Synthesis of Vanadium Dioxide Nanoparticles

Regulation of morphology and structure of vanadium dioxide via a hydrothermal method for optimizing performances

Hydrothermal Synthesis of VO 2 (A) Nanobelts and Their Phase Transition and Optical Switching Properties

Optical Switching and Nanothermochromic Studies of VO2(M) Nanoparticles Prepared by Mild Thermolysis Method

Facile synthesis and phase transition of V2O3 nanobelts

Preparation of Nanostructured VO2 Films with Enhanced Optical Performance

Porous Nano-Structured VO2 Films with Different Surfactants: Synthesis Mechanisms, Characterization, and Applications

Synthesis and Phase Transition Behavior of Undoped VO2 with a Strong Nano-Size Effect