Abstract:Nano-silica dispersion was generated in situ through the hydrolysis and condensation of tetraethyl orthosilicate with methyl methacrylate and butyl acrylate in micelles as dispersing media, hydrochloric acid as catalyst and methacryloxypropyl trimethoxysilane as modifier. Then, the nano-silica/fluorinated polyacrylate composite latexes were prepared via emulsion polymerization directly using the in situ generated nano-silica dispersion as seeds. Dodecafluoroheptyl methacrylate (DFHMA) as functional monomer was incorporated into shell layer of the composite particles by semi-continuous starved condition at the second stage. Fourier transform infrared spectroscopy indicated that silica was generated in situ and DFHMA took part in the copolymerization. Transmission electron microscopy showed uniform composite latex particle morphology and obvious core–shell structure. Dynamic light scattering demonstrated that DNS-86 could control the composite latex particle size ranging from 90 to 180 nm. DFHMA had an important effect on the particle size. Zeta potential (ζ) revealed that the composite latex had good stability. The resulted composite films were characterized by angle-resolved X-ray photoelectron spectroscopy, contact angle measurements and thermo-gravimetric analysis. The well-tailored composite latex particle structure of nano-silica core and fluorinated polyacrylate can effectively improve the hydrophobicity of the resultant films. Water contact angle could reach 123.5° when 6 wt% DFHMA was incorporated in the film. Moreover, water contact angles remained 106° after water immersion in the range of the experimental sample films. In addition, the incorporation of fluorinated monomer and nano-silica contributed to the improvement of thermal stability of the composite film.

Synthesis and Characterization of Poly(hydroxylic Fluoroacrylate)/msio2 Nanocomposite by in Situ Solution Polymerization

Nanocomposite Structure Based on Silylated MCM-48 and Poly(vinyl Acetate)

Poly(L-Lactic Acid)/Sio2 Nanocomposites Via in Situ Melt Polycondensation of L-Lactic Acid in the Presence of Acidic Silica Sol: Preparation and Characterization

One-step fabrication of 3-methacryloxypropyltrimethoxysilane modified silica and investigation of fluorinated polyacrylate/silica nanocomposite films

Preparation and Characterization of Nano-Sio2/fluorinated Polyacrylate Composite Latex Via Nano-Sio2/acrylate Dispersion

Synthesis and Surface Properties of SiO2 Modified Fluorosilicone Acrylic Copolymer Hybrids

Synthesis and Properties of Nanosilica‐reinforced Polyurethane for Grouting

Poly(vinyl Chloride‐co‐vinyl Acetate‐co‐maleic Anhydride)/silica Nanocomposites Derived from in Situ Suspension Polymerization

Synthesis of Nano-silica/Fluorinated Polyacrylate Composite Emulsions Via Miniemulsion Polymerization and Study on Its Properties

Synthesis, structural and morphological characteristics of (P(MA-MPTMS)/SiO2 hybrid nanocomposites

Synthesis and Characterization of Polyimide/Silica Nanocomposite Films

Study on fluoro-acrylate polymer/SiO2 hybrids prepared by sol-gel process

Synthesis and Characterization of Poly(fluorinated Styrene-Acrylate)/silica Nanocomposites

Synthesis and Characterization of Nano-silica/Polyacrylate Composite Emulsions by Sol-gel Method and In-Situ Emulsion Polymerization

Morphology and Tribological Behaviors of <i>In Situ</i> Polymerized Nano-SiO<sub>2</sub>/Polyacrylate Nanocomposites

Synthesis and Characterization of Film-forming Polymer/SiO2 Nanocomposite Via Surfactant-Free Emulsion Polymerization

Preparation of Fluorinated Polyacrylate Composite Latex with in Situ Generated Nano-Silica Dispersion and Film Durability

Hydrophilicity and crystallization behavior of PVDF/PMMA/TiO 2 (SiO 2 ) composites prepared by in situ polymerization

Morphology and Tribological Behaviors of in Situ Polymerized Nano-Sio2/Polyacrylate Nanocomposites

Preparation of Nano-SiO/Fluorinated Polyacrylate Composite Latex