Abstract:This study aimed to increase liquid fuel (C 5+ ) product selectivity from CO and H 2 conversion over a Cu/Fe-based catalyst and followed by artificial neural network simulation to enable a profound visualization strategy for Fischer–Tropsch (FT) process. The experiments were performed in a fixed-bed reactor over temperatures (T) of 483–553 K, pressures (P) of 14.5–203 psig, space velocities (SV) of 1000–2900 hr −1 , and H2/CO feed ratios of 1–6.2. Mathematical modeling (MM) and artificial neural network (ANN) were utilized to simulate the nonlinear CO conversion and product selectivity of the FT process. Nine simultaneous reaction pathway was developed to evaluate the reactant and product behaviors under varying FT conditions. In addition, a multilayered parameter processed by a neural network was used to predict the performance of the CO hydrogenation process. A comparison between these two approaches demonstrated that ANN more closely mimicked the nonlinear conversion and selectivity of the FT process than MM, and the correlation coefficients for the predicted mole fractions and CO conversion were 0.991 and 0.986, respectively. A hybrid Genetic Algorithm–ANN procedure was constructed to predict the optimum operating conditions to increase liquid fuel over the catalyst. The optimum C 5+ selectivity (75.1 %), which meets the FT process objective, was achieved under operating conditions of T = 483 K, P = 203 psig, SV = 1303 hr −1 , and H2/CO feed ratio = 1.01 for process design optimization.

Catalytic Cracking and PSO-RBF Neural Network Model of FCC Cycle Oil

Parameter Estimation of Catalytic Cracking Model Using PSO Algorithm

Eight Lumps Kinetic Model for Residual Oil Catalytic Cracking

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Lumped Kinetics Model and Its On-Line Application to Commercial Catalytic Naphtha Reforming Process

Kinetic Modeling with Automatic Reaction Network Generator, an Application to Naphtha Steam Cracking

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Kinetics Modeling and Operating Conditions Optimization of Fischer-Tropsch Synthesis over Fe-based Catalysts

Application of nonlinear partial least square in catalyst modeling

Liquid fuel production from syngas: Simulation and optimization using artificial neural network

Artificial neural network model of co-gasification of petroleum coke with coal or biomass in bubbling fluidized bed

Simulation Analysis of Gas-Solid Two-Phase Flow and Reaction in a Novel Catalytic Cracking Reactor

Molecular level analysis on performance of diameter expanding reactor to improve gasoline quality in FCC process

Maximizing margins and optimizing operational conditions for residue fluid catalytic cracking with an artificial intelligence hybrid reaction model

Artificial Neural Network and Response Surface Methodology for Predicting and Maximizing Biodiesel Production from Waste Oil with KI/CaO/Al2O3 Catalyst in a Fixed Bed Reactor

Molecular Modeling and Optimization for Catalytic Reforming

Molecular‐level kinetic modeling of heavy oil fluid catalytic cracking process based on hybrid structural unit and bond‐electron matrix

Cracking Performance and Feed Characterization Study of Catalytic Pyrolysis for Light Olefin Production

Prediction of the product yield from catalytic cracking (MIP) process by an 8-lump kinetic model combined with neural network

Integrated Hybrid Modelling and Surrogate Model-Based Operation Optimization of Fluid Catalytic Cracking Process

Molecular-Level-Process Model with Feedback of the Heat Effects on a Complex Reaction Network in a Fluidized Catalytic Cracking Process