Abstract:This work proposes electrically assisted electromagnetic forming (EAEMF) process to enhance strength and plasticity of AZ31B alloy. Under the same limit height, the average tensile strength, yield strength, and elongation of the EAEMF sample enhance 7.5%, 6.7%, and 50% than electromagnetic forming (EMF) sample, respectively. Moreover, energy utilization of EAEMF is found to be 100% higher than that of EMF. Few independent slip system causes poor formability of magnetic alloys at room temperature. Electromagnetic forming (EMF) is a high‐rate forming method, which improves formability of magnetic alloy. However, conventional EMF weakens energy utilization, and reduces strength and plasticity of formed parts. In this work, a novel electrical assisted electromagnetic forming (EAEMF) is proposed to improve energy utiization and properties of AZ31B alloy. nergy utilization of EAEMF is 100% higher than that of EMF under same height limit, which is due to the greater temperature and electromagnetic force acting on the sheet during EAEMF. Moreover, average tensile strength, yield strength, and elongation of the EAEMF specimen are 7.5%, 6.7%, and 50% higher than those of the EMF‐produced sample, respectively. This is because EAEMF promotes grain refinement, induces more twins and dislocations, which is beneficial for enhancing strength and plasticity. Particularly, twin density of EAEMF sample increased by 70%, grain size decreased by 26.6% owing to dynamic recrystallization. In addition, EAEMF weakened basal texture, increased deformation region and more uniform plastic deformation, provided more interfaces to accommodate disocations, which ensured the increase of plasticity. Therefore, this study proves the feasibility and superiority of EAEMF, providing new prospect for improving property of magnesium alloy parts.

Influence of body force effect of the pulsed magnetic forces on the dynamic forming limits of AA5052 sheets

PLASTIC INSTABILITY ANALYSIS OF 5052 ALUMINUM SHEETS IN MAGNETIC DYNAMIC TENSION PROCESS

Experimental Investigation on Forming Limits of AA5052 Sheet in Hybrid Quasi-Static/dynamic Plane-Strain Tensile Process

Quasi-static-dynamic Formability of AA5052-O Sheet under Uniaxial and Plane-Strain Tension

Deformation Mechanism of 5052 Aluminum Alloy Using Electrically Assisted Electromagnetic Forming

Research on formability of 5052 aluminum alloy sheet in a quasi-static–dynamic tensile process

Mechanical Analysis of the Dynamic Structural Instability of Sheets During Electromagnetic Forming Process

Experimental Observations of Quasi-Static-Dynamic Formability in Biaxially Strained Aa5052-O

Numerical Modeling and Deformation Analysis for Electromagnetically Assisted Deep Drawing of AA5052 Sheet

Improved forming capability of 7075 aluminum alloy using electrically assisted electromagnetic forming

Electromagnetic driven forming utilizing a metal ring for controlling shapes of sheet metals

Deformation and fracture behavior of 5052 aluminum alloy by electromagnetic-driven stamping

Effect of initial state on formability of AA1060 alloy under quasi-static and electromagnetic forming

Forming Limit and Mechanical Properties of 2024-O Aluminum Alloy Under Electromagnetic Forming

Effects of Process Parameters on Electromagnetic Forming of AZ31 Magnesium Alloy Sheets at Room Temperature

Strength and Plasticity Synergistic Enhancement Mechanism for AZ31B Magnesium Alloy Using Electrically Assisted Electromagnetic Forming

Electromagnetic forming of aluminum alloy sheet metal utilizing a low-frequency discharge: A new method for attractive forming

Formability of AZ31 Magnesium Alloy Sheets During Magnetic Pulse Bulging

Deformation behavior and formability of solid solution state Al–Li alloy in electromagnetic forming

Microstructure and mechanical properties of AA5052 after electromagnetic hydraulic forming

Control of the blank-holder force to improve the formability of aluminum alloy sheet