Abstract:Magnesium-zinc-calcium alloys have unique advantages of being used as biomedical bone implants since their mechanical properties and biocompatibility are similar to human tissues. However, insufficient strength and poor corrosion resistance have been the major problems to stunt the application. In this paper, the changes of microstructure, mechanical properties and corrosion resistance of ternary Mg-3Zn-0.2Ca (wt.%) with different contents of Mn (0.3, 0.5, 0.7, 0.9, wt.%) are studied. With the increase of Mn content, the grain size of as-cast alloy first decreases and then increases, this indicates that the amount of Mn affects the degree of subcooling of the alloy. At the 320°C/24 h homogenizing treatment, the large and uneven dendrites are transformed into uniform equiaxed grains, the mechanical properties of alloys with different Mn contents are different on the basis of Mg-3Zn-0.2Ca (wt.%) alloy. The five alloys were extruded into bar with a diameter of 8 mm through hot-extrusion process. Quaternary Mg-3Zn-0.2Ca-XMn (X = 0.3, 0.5, 0.7, 0.9) (wt.%) alloys are investigated and the results show that 0.5 wt.% Mn alloy has the best yield tensile strength (YS) (302 MPa) and good ultimate tensile strength (UTS) (327 MPa). The reason is that the different contents of Mn restrain the dynamic recrystallization in extrusion process, which remarkedly reduced the grain size. Moreover, each alloy is investigated by electrochemical measurements at 37°C in a simulated body fluid (SBF). The electrochemical results show that the corrosion potential of Mn-contained alloys are increased compared to ternary Mg-3Zn-0.2Ca (wt.%) alloy, and 0.5 wt.% Mn-contained alloy performs the best result.

Effect of Mn on Corrosion Behavior of Mg-9Al-2Sn

Effect of Manganese on Microstructure and Corrosion Behavior of the Mg-3Al Alloys

ect of Manganese on Microstructure and Corrosion Behavior of the Mg3 Al Alloys

Effect of elemental RE and Mn on corrosion resistance of Mg-9Al Alloy

Study of the Corrosion Behavior and the Corrosion Films Formed on the Surfaces of Mg–xSn Alloys in 3.5wt.% NaCl Solution

Effect of Sn Content on the Mechanical Properties and Corrosion Behavior of Mg-3Al-xSn Alloys

EFFECT OF Sb AND Mn ADDITIONS ON THE CORROSION BEHAVIOUR OF Zn

Effect of trace Mn modification on the microstructure and corrosion behavior of Sn−9Zn solder alloy

Effect of Mn Addition on Microstructure and Corrosion Behavior of Extruded Mg-Zn-Y-Nd Alloy

Effects of Mn Addition on the Microstructure and Mechanical Properties of Cast Mg–9Al–2Sn (wt.%) Alloy

Effect of Sn on Corrosion Resistance of Mg-6Al-1.2Y-0.9Nd Alloy

EFFECTS OF Sn ON MICROSTRUCTURES AND CORROSION RESISTANCE OF Mg-6Al-1.2Y-0.9Nd MAGNESIUM ALLOY

Effect of Mn Element Addition on the Microstructure, Mechanical Properties, and Corrosion Properties of Mg-3Zn-0.2Ca Alloy

Effects of Mn and Sn on Corrosion Resistance of Al-7Si Cast Alloys

Effect of Sn Addition on Microstructure and Corrosion Behavior of As-Extruded Mg–5Zn–4Al Alloy

Effect of Alloying Elements on Corrosion Behaviour of Binary Magnesium Alloys

Corrosion Behavior of As-Cast Mg–5Sn Based Alloys with in Additions in 3.5 Wt% NaCl Solution

Corrosion Behavior of Mg-Al-Pb and Mg-Al-Pb-Zn-Mn Alloys in 3.5% NaCl Solution

Effects of Mn on Corrosion Resistant Property of Az91 Alloys

Effects of Mn Addition on the Corrosion Behaviors of Zr-Sn-Nb-Fe-Mo Alloys

Effect of Sm on Corrosion Behavior of Mg-6Al Alloy