Abstract:To correctly understand the requirements of a system, we must first study its schematics. In the case of energy systems, they require a detailed diagram of energy performance. Heat losses can be classified into high-temperature losses, medium-temperature and low-temperature losses. On board ships with low-speed propulsion engines, heat recovery systems operate in the range of 100-400 °C. Many residual energy recovery systems from internal combustion engines are under development: for example the MAN WHR development program for Tier III technologies. In this paper, I will treat both theoretical calculation elements and real elements of the operation of the turbocharging system, for the main reference engine. I chose to treat this system because it is a main subassembly for the engine, in terms of operation and thus its efficiency. In the theoretical calculation, I will start from the initial calculation data and I will expose the geometric and functional parameters of the turbocharger. The exhaust gases up to a temperature of 650 °C passes continuously through the turbine and heat its components, without its system of contraction cooling. In particular, the shaft bearing must withstand high operating temperatures without ever breaking the lubrication device. On the compressor side, the air is heated to over 200 °C. High temperatures lead to extreme thermal loads of the material in many locations. Speeds are extremely high: METxxSE turbochargers, as in figure 1, run at speeds between 10000 and 35000 rpm, depending on size. In this respect, the tangential speeds of 560 m / s and even more are reached at the compressor turbine, which rises to 1.7 times the speed of sound or 2000 km / h. The efficiency of the operation of the turbocharger system related to the main propulsion engine depends on the internal processes that take place in its operation, and also on the environmental conditions. In this way, the direction of processing on the installation is dictated by the engine load, taking into account the extreme situations, corresponding to the operation of the ship in special conditions (overload, tropical temperature, arctic temperature etc.).

Part-load analysis of waste heat recovery system for a 10000TEU container ship

Thermo-economic analysis and multi-objective optimization of S-CO2 Brayton cycle waste heat recovery system for an ocean-going 9000 TEU container ship

Optimization and 4E analysis of integration of waste heat recovery and exhaust gas recirculation for a marine diesel engine to reduce NOx emissions and improve efficiency

Analysis of a 1 Kw Organic Rankine Cycle Using a Scroll Expander for Engine Coolant and Exhaust Heat Recovery

Parameters analysis of 600 MW + 120 MW peak load unit by integrated generate technology

Thermodynamic analysis and multi-objective optimization of a transcritical CO2 waste heat recovery system for cruise ship application

Investigation on thermo-economic performance of shipboard waste heat recovery system integrated with cascade latent thermal energy storage

Simulation and optimization of the waste heat recovery system of the ship power system based on the heat current method

Energy and exergy analysis of the combined cycle power plant recovering waste heat from the marine two-stroke engine under design and off-design conditions

Simulation of Waste Heat Recovery From Ship Boiler Exhaust Gas

Working fluid selection and performance analysis for multistage ship waste heat recovery based on thermal power generation‐organic Rankine cycle combined cycle

Thermodynamic analysis of exhaust heat recovery of marine ice using organic rankine cycle

Study of the functional parameters of main engine turbocharger for a tanker ship

Thermo-economic optimization and environmental analysis of a waste heat driven multi-ejector chiller for maritime applications

Marine temperature and humidity regulation combined system: performance analysis and multi-objective optimization

Simulation research of TEG-ORC combined cycle for cascade recovery of vessel waste heat

Multi objective optimization and 3E analyses of a novel supercritical/transcritical CO2 waste heat recovery from a ship exhaust

A review of waste heat recovery from the marine engine with highly efficient bottoming power cycles

Performance Modulation of S-CO2 Brayton Cycle for Marine Low-Speed Diesel Engine Flue Gas Waste Heat Recovery Based on MOGA

Thermodynamic Analysis of a Marine Diesel Engine Waste Heat-Assisted Cogeneration Power Plant Modified with Regeneration Onboard a Ship

Thermodynamic analysis and performance optimization of an Organic Rankine Cycle (ORC) waste heat recovery system for marine diesel engines