Abstract:It has long been found that the flow pattern of the liquid phase on distillation tray is of great importance on distillation process performance. But until now, there was very few published work on quantitative investigation of this subject. By combining the computational fluid dynamics (CFD) with the mass transfer equation, a theoretical model is proposed for predicting the details of velocity and concentration distributions as well as the tray efficiency of distillation tray column. Using the proposed model, four different cases corresponding to different assumptions of liquid and vapor flowing condition for a distillation tray column were investigated. In Case I, the distributions of velocity and concentration of the incoming liquid from the downcomer and the uprising vapor from the underneath tray spacing are uniform. In Case n, the distribution of the incoming liquid is non-uniform but the uprising vapor is uniform. In Case HI, the distribution of the incoming liquid is uniform but the uprising vapor is non-uniform. In Case IV, the distributions of both the incoming liquid and the uprising vapor are non-uniform. The details of velocity and concentration distributions on a multiple sieve tray distillation column in four different cases were simulated using the proposed model. It is found that the shape of the simulated concentration profiles of vapor and the liquid is quite different from case to case. The computed results also show that the tray efficiency is highly reduced by the maldistribution of velocity and concentration of the incoming liquid and uprising vapor. The tray efficiency for Case I is higher than Case Ⅱ or Case Ⅲ, and that for Case Ⅳ is the lowest. It also reveals that the accumulated effect of maldistribution becomes more pronounced when the number of column trays increased. The present study demonstrates that the use of computational method to predict the mass transfer efficiency for the tray column, especially for the large one, is feasible.

Comparative Analysis of Chromatography Dynamic Models in Predicting the Plate Height Contributed by Interphase Mass Transfer

Mathematical Model of the Dynamics of Countercurrent Chromatography

Behavior of Soybean Phosphatidylcholine in Silica-Gel Liquid Chromatography

An Improved Dynamic Combined Model for Evaluating the Mass Transfer Performances in Extraction Columns

Investigation of the Concentration Dependence of Mass Transfer Coefficients in Reversed-Phase Liquid Chromatography

Numerical investigation into the effects of ordered particle packing and slip flow on the performance of chromatography.

The Analysis of Distillation Tray Column Efficiency by Fluid Dynamics and Mass Transfer Computation

A Dynamic Forward Mixing Model for Evaluating the Mass Transfer Performances of an Extraction Column

Aggregate Models Based On The Wave Propagation Theory For High-Purity Distillation Columns

Modeling of thermal processes in very high pressure liquid chromatography for column immersed in a water bath: Application of the selected models

Comparing Two Models of Gradient Elution in Counter-Current Chromatography

A Dynamic Interaction Mass Transfer Model for Simulating the Mass Transfer Process in Extraction Columns

Mass transfer model for liquid liquid micromixing systems

Mass Transfer Study and Combined Model for a Karr Column

Study of the peak variance in isocratic and gradient liquid chromatography using the transport model.

A modeling method based on incomplete mixed cells in counter-current chromatography: interphase mass transfer ratio

Analytical and numerical solutions of linear and nonlinear chromatography column models

Modeling the Performance of Protein-a Affinity Columns Using Asymptotic Solutions

Influence of pressure gradient on column efficiency in GC separations

CFD Simulation of Flow and Mass Transfer in Structured Packing Distillation Columns

New Approach to Modeling and Simulation of Chemical and Mass Transfer Processes in Column Apparatuses