Abstract:A hybrid process of enhanced coagulation at a high dosage of polyaluminum chloride and flat-sheet cross-flow ultrafiltration was used for the advanced treatment of the effluent from a biological treatment process of deinking wastewater in a paper mill. The experimental results obtained by a small-scale continuous laboratory experimental device showed that the absorption resistance was significantly lower than the membrane intrinsic resistance, the concentration polarization resistance, the pore blocking resistance, and the cake layer resistance and so it can be ignored. With increasing polyaluminum chloride dosage from 0 to 2,000 mgL-1, the total membrane filtration resistance decreased and the membrane flux increased, but the concentration polarization resistance increased. With the increase in cross flow velocity, the total membrane filtration resistance, the pore blocking resistance, the layer resistance, and the concentration polarization resistance all decreased, and consequently, the membrane flux increased. With regard to the concentration polarization resistance, the cross flow velocity had a more significant effect than the trans-membrane pressure. But the trans-membrane pressure had a more significant effect on the layer resistance, the pore blocking resistance, and the total membrane filtration resistance than the cross flow velocity. The filtration resistance at the polyaluminium chloride dosage of <1,000 mgL-1 could be ranked as follows: the membrane intrinsic resistance > the pore blocking resistance > the layer resistance > the concentration polarization resistance> the absorption resistance. But it was the membrane intrinsic resistance > the concentration polarization resistance > the pore blocking resistance > the layer resistance > the absorption resistance at the dosage of ≥1,000 mgL-1. The results are helpful for the membrane fouling control and can promote the application of flat-sheet cross-flow membrane process, resultantly improving the reclaim and reuse of deinking wastewater, and reducing the emission of contaminants in deinking wastewater.

Floc Characterization and Membrane Fouling of Polyferric–polymer Dual/composite Coagulants in Coagulation/ultrafiltration Hybrid Process

Treatment of Fumaric Acid Wastewater Using Integrated Process of Hollow-Fiber Supported Liquid Membrane-Strip Dispersion with Reverse Osmosis

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Influence of floc size and structure on membrane fouling in coagulation-ultrafiltration hybrid process--the role of Al13 species

Influence of Flocs Breakage Process on Membrane Fouling in Coagulation/ultrafiltration Process—effect of Additional Coagulant of Poly-Aluminum Chloride and Polyacrylamide

Landfill Leachate Treatment by Coagulation/flocculation Combined with Microelectrolysis-Fenton Processes

Membrane fouling in a hybrid process of enhanced coagulation at high coagulant dosage and cross-flow ultrafiltration for deinking wastewater tertiary treatment

Integrated Fe-based Floc-Membrane Process for Alleviating Ultrafiltration Membrane Fouling by Humic Acid and Reservoir Water

Coagulation-flocculation performance and floc properties of composite bioflocculant PAFC-CBF in treating the surface water

Membrane Fouling on Coagulation/aid-Coagulation/ultrafiltration Process for Drinking Water Treatment

Overlooked flocs in electrocoagulation-based ultrafiltration systems: A new understanding of the structural interfacial properties

Application of laminarin as a novel coagulant aid to improve coagulation-ultrafiltration efficiency

[Reducing Membrane Fouling from Micro-Flocculation in a Humic Acid Ultrafiltration Process].

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Enhancing ultrafiltration of algal-rich water using ferrate activated with sodium percarbonate: Foulants variation, membrane fouling alleviation, and collaborative mechanism

Comparison of flocculant aids as pretreatment reagent for membrane filtration process by fingerprint analysis of organic matters in secondary effluent

Using inorganic coagulants to control membrane fouling in a submerged membrane bioreactor

Characteristics of coagulation-flocculation of humic acid with effective performance of polymeric flocculant and inorganic coagulant

Fouling Identification for Nanofiltration Membrane and the Potential Reduction of Pollutants in the Leachate by Using Fe/Al/PAC Coagulation

Insight into Control Mechanism of Polymeric Ferric Titanium Composite Coagulant on Membrane Fouling: Role of Natural Organic Matters

A membrane fouling control strategy based on a combination of pre-treatment mitigation and in-situ membrane surface regulation using a composite coagulant