Abstract:Water contamination by emerging organic pollutants, such as pharmaceuticals and personal care products (PPCPs), is becoming more and more serious. Porous aromatic frameworks (PAFs) are considered as promising adsorbents to remove the PPCPs. To overcome the limitation of PAFs in their powder forms for large-scale applications, herein, we proposed a strategy to covalently anchor PAFs onto electrospun polymer fiber membranes. Polyaniline (PANI) played the role of aromatic seed layer, which was coated on the electrospun polyacrylonitrile (PAN) fiber membrane first. Then, PAF-45 modification was in situ synthesized in the presence of the PANI-coated electrospun PAN fiber membrane. This study could make the PAF-based materials be handled more easily and improve the surface area of electrospun fiber membrane. The obtained composite adsorbent (PAF-45-PP FM) was applied for the adsorption of three PPCPs: ibuprofen (IBPF), chloroxylenol (CLXN), and N, N-diethyl-meta-toluamide (DEET), which exhibited high adsorption capacity and good recycling ability. According to the Langmuir model, the maximum adsorption capacities of PAF-45-PP FM toward IBPF, CLXN and DEET were 613.50, 429.18, and 384.61 mg/g, respectively. In addition, after ten adsorption-desorption cycles, the adsorption capacities toward the three PPCPs decreased slightly. Through an adsorption comparison test, the adsorption capacity of PAF-45-PP FM almost attributed to the loading PAF-45. The adsorption mechanism analysis illustrated that there were pore capture, hydrophobic interaction and π-π interaction between PPCPs and PAF-45-PP FM. Therefore, the PAF-45-PP FM can be potential adsorbents to purify water contaminated with PPCPs.

Porous Electrospun Pes/Peg Ultrafine Fibers for the Removal of Endocrine Disruptors

Polyethersulfone Nanofibers for the Removal of Endocrine Disruptors

Electrosprayed Porous Microspheres for the Removal of Endocrine Disruptors

One-step Electrospinning of Negatively-Charged Polyethersulfone Nanofibrous Membranes for Selective Removal of Cationic Dyes

Preparation of porous polysulfone beads for selective removal of endocrine disruptors

Molecularly Imprinted Electrospinning Polyethersulfone Nano-Scale Fibers for the Binding and Recognition of Bisphenol A

Preparation of DNA Hybrid Polyethersulfone Microspheres for Endocrine Disruptor Removal

In Situ Cross-Linked Polymerization Toward Poly(Ether Sulfone)/Poly(Sodium Acrylate) Hybrid Particles for the Removal of Environmental Toxins

PES Magnetic Microspheres: Preparation and Performance for the Removal of Endocrine Disruptor-Bpa

Preparation of Polyethersulfone-Modified Sepiolite Hybrid Particles for the Removal of Environmental Toxins

Structure Controlling and Adsorption Application of Polyethersulfone Porous Microspheres Prepared Via Electrospraying

Preparation Of Polyethersulfone/Sulfonated Polyethersulfonephenylethane Microspheres And Its Application For The Adsorption Of Bisphenol A

Preparation of Polyethersulfone–organophilic Montmorillonite Hybrid Particles for the Removal of Bisphenol A

Removal of endocrine disrupting chemicals from water through urethane functionalization of microfiltration membranes via electron beam irradiation

DNA‐loaded Porous Polyethersulfone Particles for Environmental Applications II. Utilization

Gravity-driven Electrospun Membranes for Effective Removal of Perfluoro-Organics from Synthetic Groundwater

Development of novel charged surface modifying macromolecule blended PES membranes to remove EDCs and PPCPs from drinking water sources

Green electrospun Janus membrane of polyether block amide (PEBA) doped with hierarchical magnesium hydrogen phosphate for the removal of pharmaceuticals and personal care products

Mild and Friendly Preparation of a High-Surface Porous Organic Polymers and Its Application for Sensitive Detections of Endocrine Disrupting Chemicals

Preparation of DNA-encapsulated Polyethersulfone Hollow Microspheres for Organic Compounds and Heavy Metal Ions Removal

Porous Aromatic Framework Modified Electrospun Fiber Membrane as a Highly Efficient and Reusable Adsorbent for Pharmaceuticals and Personal Care Products Removal