Abstract:Alternative aviation fuel is a crucial strategy to realize CO 2 reduction for airline industry and catalytic pyrolysis is one of important processes to produce alternative aviation fuels. However, catalytic pyrolysis is still hindered by high production cost and deactivation of catalysts during catalytic conversion processes. In this study, composite catalysts Me-Y/MCM-41 (Me = La, Ce, and Ni) with hierarchical pores and metal oxide doping have been synthesized for catalytic pyrolysis of microalgal lipids to produce alternative aviation fuels. The hierarchically porous supports were prepared via the method of in situ growth of mesoporous materials on microporous zeolites. The characterization of as-synthesized catalysts indicated the presence of mesoporous and microporous phases in composite catalysts, and metal oxides were well dispersed on the surface of hierarchically porous supports with the doping amount of 7.7–11.5%. Catalytic activity of as-synthesized composite catalysts was also evaluated by Py-GC/MS using the feedstock of microalgal lipids. After catalytic pyrolysis, the selectivity of hydrocarbons in liquid biofuels significantly increased, especially for composite catalyst Ce-Y/MCM-41, while the composition of liquid biofuels was predominated by fatty acids in blank experiments without catalysts. Therefore, the main composition of liquid biofuels were alkanes, olefins, and aromatic hydrocarbons with high selectivity (above 70%) on kerosene-range products (C 8 –C 16 ). This research provides necessary information about novel hierarchically porous composite catalysts for microalgae-based biorefinery and production of alternative aviation fuels by catalytic pyrolysis.

Production of aviation fuel via catalytic hydrothermal decarboxylation of fatty acids in microalgae oil.

Direct production of aviation fuels from microalgae lipids in water

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Hydrothermal decarboxylation and hydrogenation of fatty acids over Pt/C.

Direct Production of Aviation Fuel Range Hydrocarbons and Aromatics from Oleic Acid Without an Added Hydrogen Donor

Microalgae Lipids Extracted by Hydrothermal Method Through Deoxygenation and Hydrocracking to Produce Jet Fuel

Catalytic Pyrolysis of Microalgae for Production of Aromatics and Ammonia

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Impact of Pt/Al-MCM-41 Catalyst Metal/Acid Ratio in Hydrocracking of Bio-Alkanes for Bio-Jet Fuel Production

The production of renewable aviation fuel from waste cooking oil. Part II: Catalytic hydro-cracking/isomerization of hydro-processed alkanes into jet fuel range products

Enhanced photocatalytic alkane production from fatty acid decarboxylation via inhibition of radical oligomerization

Catalytic hydroprocessing of microalgae-derived biofuels: a review

The Selective Production of Jet Fuel Range Alkanes Via the Catalytic Upgrading of Palmitic Acid over Co/HMCM-49 Catalysts

Production of Sustainable Aviation Fuel by Hydrocracking of n-Heptadecane Using Pt-Supported Y-Zeolite-Al2O3 Composite Catalysts

Catalytic pyrolysis of microalgal lipids to liquid biofuels: Metal oxide doped catalysts with hierarchically porous structure and their performance

Lipase-catalyzed methanolysis of microalgae oil for biodiesel production and PUFAs concentration

Jet Range Hydrocarbons Converted from Microalgal Biodiesel over Mesoporous Zeolite-Based Catalysts

Catalytic pyrolysis of microalgal lipids to alternative aviation fuels: catalysts with hierarchical structure and metal oxide doping

Modified Ni-Based Metal–Organic Frameworks (Ni-Btc) with High Deoxygenation and Cracking Ability for Production of a Jet Fuel-Range Hydrocarbon Blend at a Low Catalyst Dosage

Utilization of microalgae for bio-jet fuel production in the aviation sector: Challenges and perspective

Highly selective production of bio-jet fuel grade alkanes over Fe/SiO2-Al2O3 solid acid catalyst under solvent-free conditions