Abstract:The inherent disadvantages of carbon-based anodes, including their low hydrophilicity, significant charge transfer resistance, and limited power density, hinder their widespread commercial utilization in microbial fuel cells (MFC). Addressing these challenges, this study involved the surface modification of a carbon-based anode. To improve the adhesion of electroactive microorganisms (EAM) on the anode surface and increase the extracellular electron transfer rate, CNT@Ti 3 C 2 T x MXene was applied to the surface of carbon cloth (CC) using drip coating. Initially, we conducted a comprehensive investigation on the optimal amount of modification required. To achieve this, we designed four distinct groups of modified electrodes. Through electrochemical analysis and phase characterization, it was determined that a modification dosage of 1.5 mg/cm 2 for CNT@Ti 3 C 2 T x MXene/CC electrodes yielded the most optimal electrical conductivity and the highest capacitance. The Rs of CC is reduced from 1.48 to 0.55 Ω and the Rct from 2.62 to 2.09 Ω, and the capacitance is increased from 3.98 10 −07 F to 9.11 10 −06 F . Subsequently, the CNT@Ti 3 C 2 T x MXene/CC with a modification of 1.5 mg/cm 2 was used as the anode of the microbial fuel cell. The modification of CNT@Ti 3 C 2 T x MXene improved the power generation performance. The maximum output voltage of the MFC was increased from 546 to 709 mv, and the power density was increased from 44.9 to 101.8 mW/m 2 . The underlying factor lies in the ability of CNT@Ti 3 C 2 T x MXene/CC to significantly lower the internal resistance within the microbial fuel cell, thereby fostering the development of biofilm. Notably, our observations revealed that the biofilm formation was particularly facilitated on the anode surface of CNT@Ti 3 C 2 T x MXene/CC. In essence, the CNT@Ti 3 C 2 T x MXene-modified carbon cloth not only minimizes internal resistance but also enhances the electroactive surface area, exhibiting superior electrical conductivity. These attributes make it an advantageous material for biological applications.

Microbial Biofuel Cell Operating Effectively Through Carbon Nanotube Blended with Gold–titania Nanocomposites Modified Electrode

TiO2 Nanotube Arrays Modified Titanium: A Stable, Scalable, and Cost-Effective Bioanode for Microbial Fuel Cells

CNT@Ti3C2TxMXene Nanocomposite Catalysts as Anodes to Improve the Electricity Production Performance of Microbial Fuel Cells

Porous α-Fe2O3 nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell

Three-dimensional Carbon Nanotube-Textile Anode for High-Performance Microbial Fuel Cells.

Porous -Fe<sub>2</sub>O<sub>3</sub> nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell

Enhanced performance of a microbial fuel cell using CNT/MnO2 nanocomposite as a bioanode material.

Electricity Generation, Energy Storage, and Microbial-Community Analysis in Microbial Fuel Cells with Multilayer Capacitive Anodes

Carbon Nanotube/Chitosan Nanocomposite As A Biocompatible Biocathode Material to Enhance the Electricity Generation of A Microbial Fuel Cell

High-Capacitance Manganese Dioxide Oxide/Carbon Nanotube/Carbon Felt as a Bioanode for Enhanced Energy Output in Microbial Fuel Cells

Carbon nanotube powders as electrode modifier to enhance the activity of anodic biofilm in microbial fuel cells.

Improving Microbial Fuel Cell Performance Using Porous Capacitive Composite Bioanode Materials with Energy Storage Function

Application of Surface-modified Carbon Nanotubes Powder in Microbial Fuel Cell

3D Hierarchical Co8FeS8-FeCo2O4/N-CNTs@CF with an Enhanced Microorganisms-Anode Interface for Improving Microbial Fuel Cell Performance

TiO2 Nanoparticles-Decorated Carbon Nanotubes for Significantly Improved Bioelectricity Generation in Microbial Fuel Cells

Nano-Fe3C@2D-NC@CC as anode for improving extracellular electron transfer and electricity generation of microbial fuel cells

Modification of carbon based cathode electrode in a batch-type microbial fuel cells

Bio-electrocatalyst Fe3O4/Fe@C derived from MOF as a high-performance bioanode in single-chamber microbial fuel cell

Enhanced Performance of Microbial Fuel Cell with a Bacteria/multi-Walled Carbon Nanotube Hybrid Biofilm

3D Porous Sponge/Carbon Nanotube/Polyaniline/Chitosan Capacitive Bioanode Material for Improving the Power Generation and Energy Storage Performance of Microbial Fuel Cells

Enhanced microorganism attachment and flavin excretion in microbial fuel cells via an N,S-codoped carbon microflower anode