Abstract:Hydrothermal liquefaction technology (HTL) is a promising thermochemical method to convert biomass into novel liquid fuels. The introduction of oxides and inorganic acids/bases during the hydrothermal process significantly impacts the yield and composition of bio-oil. However, systematic research on their effects, especially at lower temperatures, remains limited. In this paper, we examine the effects of acidity and alkalinity on cotton stalk hydrothermal bio-oil by introducing homogeneous acids and bases. Given the operational challenges associated with product separation using homogeneous acids and bases, this paper further delves into the influence of heterogeneous oxide catalysts (possessing varying degrees of acidity and alkalinity, as well as distinct microstructures and pore architectures) on the production of cotton stalk hydrothermal bio-oil. The effects of nanoscale oxides (CeO2, TiO2, ZnO, Al2O3, MgO and SiO2) and homogeneous acid–base catalysts (NaOH, K2CO3, Na2CO3, KOH, HCl, H2SO4, HNO3) on the quality of cotton stalk bio-oil under moderate hydrothermal conditions (220 °C, 4 h) were investigated. Characterization techniques including infrared spectroscopy, thermogravimetric analysis, elemental analysis, and GC-MS were employed. The results revealed that CeO2 and NaOH achieved the highest bio-oil yield due to Ce3+/Ce4+ redox reactions, OH-LCC disruption, and ionic swelling effects. Nano-oxides enhanced the formation of compounds like N-ethyl formamide and aliphatic aldehydes while suppressing nitrogen-containing aromatics. The total pore volume and average pore width of oxides negatively correlated with their catalytic efficiency. CeO2 with low pore volume and width exhibited the highest energy recovery. The energy recovery of cotton stalk bio-oil was influenced by both acid and base sites on the oxide surface, with a higher weak base content favoring higher yields and a higher weak acid content inhibiting them. The findings of this research are expected to provide valuable insights into the energy utilization of agricultural solid waste, such as cotton stalks, as well as to inform the design and development of highly efficient catalysts.

Preparation of the Second Generation Biodiesel via Hydrodeoxygenation of Cottonseed Oil

Catalytic Hydrodeoxygenation of Vegetable Oil over Ni Catalysts to Produce Second-Generation Biodiesel

Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Highly Selective Hydrodecarbonylation of Oleic Acid into N‐heptadecane over a Supported Nickel/Zinc Oxide–Alumina Catalyst

Extraction of microalgae oil and further production for second-generation biodiesel

Production of Second-Generation Diesel: Effects of Catalyst Passivation on the Deoxygenation of Oleic Acid

Advances in preparation technology for second generation of biodiesel

Green diesel-like hydrocarbon production by H2-free catalytic deoxygenation of oleic acid via Ni/MgO-Al2O3 catalysts: Effect of the metal loading amount

Hydrodeoxygenation of Methyl Palmitate over Supported Ni Catalysts for Diesel-like Fuel Production

Upgrading of Light Bio-oil from Solvothermolysis Liquefaction of an Oil Palm Empty Fruit Bunch in Glycerol by Catalytic Hydrodeoxygenation Using NiMo/Al 2 O 3 or CoMo/Al 2 O 3 Catalysts

Palladium-Catalyzed Decarboxylation of Higher Aliphatic Esters: Towards A New Protocol to the Second Generation Biodiesel Production

Co-Pyrolysis Behaviors of the Cotton Straw/PP Mixtures and Catalysis Hydrodeoxygenation of Co-Pyrolysis Products over Ni-Mo/Al2O3 Catalyst

The promotion effects of MoOx species in the highly effective NiMo/MgAl2O4 catalysts for the hydrodeoxygenation of methyl palmitate

Effects of CoMo/γ-Al2O3 Catalysts on Product Hydrocarbon and Phenol Distribution during Hydrodeoxygenation of Oxidized Bio-Oil in a Batch Reactor

Sodium Glyceroxide: An Efficient Homogeneous Alkaline Catalyst for Biodiesel Synthesis

Efficiency conversion of jatropha oil into high-quality biofuel over the innovative Ni-Mo2N based catalyst

Gas-phase catalytic hydrodeoxygenation of phenolic compounds derived from lignin pyrolysis for hydrocarbon production using Ni@HZSM-5-γ-Al2O3

Synthesis of Renewable Diesel Range Alkanes by Hydrodeoxygenation of Palmitic Acid over 5% Ni/Cnts under Mild Conditions

Catalytic Hydrotreating of Crude Pongamia pinnata Oil to Bio-Hydrogenated Diesel over Sulfided NiMo Catalyst

Investigation of Cotton Stalk-Derived Hydrothermal Bio-Oil: Effects of Mineral Acid/Base and Oxide Additions