Abstract:Acetylene (C2H2) plasma immersion ion implantation (PIII) into polyurethane (PU) films was performed with different processing times of from 8 to 40 minutes. The surface properties were characterized by means of contact angle measurement, X-ray photoelectron spectroscopy (XPS), and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). The contact angle of water decreased from the original 79.2°to 42.5° and the surface energy increased from 41.1 mN/m to 55.8 mN/m. The results show that the water wettability of PU was improved by PIII. The blood compatibility of the modified PU films was studied by platelet adhesion tests. The results showed significant difference for the behavior of platelet adhesion between different PU films. The statistical number of adherent platelets on the surface of PU per 1200 μm2 after 15 min incubation showed that an average of 25 to 28 contact-adherent platelets were present on the untreated PU film. In contrast, the number of platelets adhered on the surface of PU that was treated by acetylene PIII for 8 minutes was less than half of the platelets on the untreated PU film. This suggests that adhesion of platelets is significantly suppressed on the surface of PU modified by C2H 2 PIII. Photographs of scanning electron microscopy (SEM) showed that the adherent platelets on the surface of PU after C2H 2 PIII at suitable treatment process had few aggregations and pseudopodiums. XPS spectra showed that the carbon content on the PU surface was increased after C2H2 implantation. Furthermore, the result of ATR-FTIR indicated that the characteristic adsorption peak at wavenumber 1657 cm-1 corresponding to -C=C- can be found on the PIII-treated PU surface, whereas this characteristic adsorption peak cannot be detected on the untreated surface. This indicates that polyacetylene chains were formed and grafted on PU surface by C2H2 plasma immersion ion implantation. This suggests that the improvement of the platelet adhesion of modified PU might come from the destruction of original surface chemical bonds and formation of polyacetylene chains by PIII.

Microwave-assisted functionalization of polyurethane surface for improving blood compatibility

Microwave-assisted Immobilization of Heparin Onto Polyurethane Surface for Improving Blood Compatibility

A facile approach to modify polyurethane surfaces for biomaterial applications.

A Facile Preparation of Poly(ethylene Oxide)-Modified Medical Polyurethane to Improve Hemocompatibility

Hemocompatibility evaluation of polyurethane film with surface-grafted poly(ethylene glycol) and carboxymethyl-chitosan

Chemically Induced Graft Copolymerization Of 2-Hydroxyethyl Methacrylate Onto Polyurethane Surface For Improving Blood Compatibility

Biomimetic Hemo-compatible Surfaces of Polyurethane by Grafting Copolymer Brushes of Poly(ethylene glycol) and Poly(phosphorylcholine methacrylate)

Chemical graft polymerization of sulfobetaine monomer on polyurethane surface for reduction in platelet adhesion.

Synthesis and Characterization of Novel H‐htbn/peg PU Copolymers: Effect of Surface Properties on Hemocompatibility

Enhanced Blood Compatibility of Polyurethane Functionalized with Sulfobetaine.

Surface Modifications of Polyurethane Containing Ester Groups in the Side Chain and Their Blood Compatibility

Surface Modification of Medical Polyurethane by Acetylene Plasma Immersion Ion Implantation

Synthetic studies on blood compatible materials. VIII. Poly(ether-urethane) surface grafted with sulfo-ammonium zwitterion monomer activated by ozone

Grafting of Poly(ethylene Glycol) Monoacrylates on Polycarbonateurethane by UV Initiated Polymerization for Improving Hemocompatibility

Surface functionalization of polyurethanes: A critical review

Surface Modification of Polycarbonate Urethane by Grafting Polyethylene Glycol and Bivalirudin Drug for Improving Hemocompatibility

Functionalizing of Polyurethane Surfaces by Photografting with Hydrophilic Monomers

Adhesive and Self-Healing Polyurethanes with Tunable Multifunctionality

Polyurethane vascular catheter surface grafted with zwitterionic sulfobetaine monomer activated by ozone.

Chemical grafting of sulfobetaine onto poly(ether urethane) surface for improving blood compatibility

Surface modification of polyurethane for promotion of cell adhesion and growth 1: Surface photo-grafting with N,N-dimethylaminoethyl methacrylate and cytocompatibility of the modified surface