Abstract:Through the observation of the pore structure and mercury intruding porosimetry (MIP) experiments of some typical porous building materials, we found that the diffusion coefficient of the material can be expressed by that of a representative elementary volume (REV) in which the pore structure can be simplified as a connection in series of macro and meso pores. Based upon that, a macro–meso two-scale model for predicting the diffusion coefficient of porous building materials is proposed. In contrast to the traditional porous mass transfer model for determining the diffusion coefficient described in the literature [Blondeau, P., Tiffonnet, A.L., Damian, A., Amiri, O., Molina, J.L., 2003. Assessment of contaminant diffusivities in building materials from porosimetry tests. Indoor Air 13, 302–310; Seo, J., Kato, S., Ataka, Y., Zhu, Q., 2005. Evaluation of effective diffusion coefficient in various building materials and absorbents by mercury intrusion porosimetry. In Proceedings of the Indoor Air, Beijing, China, pp. 1854–1859], the proposed model relates the volatile organic compound (VOC) diffusion coefficient of building material not only to the porosity of the building material, but also to the pore size distribution and pore connection modes. To verify the model, a series of experiments of VOC emissions of three types of medium-density board were conducted. The comparison of the model and experimental results shows that the proposed model agrees much better with the experimental results than the traditional models in the literature. More validation for other building materials is needed. The proposed model is useful for predicting the VOC diffusion coefficient of porous building materials and for developing low VOC emission building materials.

Modeling volatile organic compounds sorption on dry building materials using double-exponential model

A Mass Transfer Model for Simulating VOC Sorption on Building Materials

A general analytical model for formaldehyde and VOC emission/sorption in single-layer building materials and its application in determining the characteristic parameters

A new mass transfer based model of VOC emissions from building materials

An improved mass transfer based model for analyzing VOC emissions from building materials

The Validation of A Voc Diffusion Sink Model Based on Full-Scale Chamber Test

General Analytical Mass Transfer Model for VOC Emissions from Multi-Layer Dry Building Materials with Internal Chemical Reactions

The Multi-Layer Model For Voc Emissions From Dry Building Material With Double Emisssion Surfaces: Validation And Applications

Modeling Double Surface Voc Emissions From Plat-Plate Building Materials Under Asymmetric Convective Conditions

A General Model for Analyzing Single Surface VOC Emission Characteristics from Building Materials and Its Application

Moisture Swing Frequency Response Method for Characterization of Ion-Transport Kinetics of Co2 Adsorption

A mass transfer model for simulating volatile organic compound emissions from ‘wet’ coating materials applied to absorptive substrates

A General Model For Analyzing Voc Emissions From Multi-Layer Dry Building Materials With Double Emission Surfaces

Macro–meso Two-Scale Model for Predicting the VOC Diffusion Coefficients and Emission Characteristics of Porous Building Materials

An Analytical Mass Transfer Model for Predicting VOC Emissions from Multi-Layered Building Materials with Convective Surfaces on Both Sides

New Indices to Evaluate Volatile Organic Compound Sorption Capacity of Building Materials (RP-1321)

Mathematical model for simulation of VOC emissions and concentrations in buildings

Exponential Decay Model Of Tvoc Emission From Indoor Building Materials

EFFECT OF VOC SORPTION ON INDOOR AIR QUALITY - A SIMULATION STUDY

Study on Characteristics of Double Surface VOC Emissions from Dry Flat-Plate Building Materials

Numerical prediction model for long- and short-term concentration of indoor volatile organic compounds from building materials