Abstract:A series of transition metal‐doped TiO2 was prepared by a simple sol‐solvothermal method. Ag−TiO2 was chosen for further study due to its extraordinary reactivity. Ag−TiO2 produces more ⋅O2− and ⋅OH under visible light, which are responsible for the oxidation of methyl orange to CO2 and H2O and other inorganic small molecules. In this study, a series of transition metal‐doped TiO2 was prepared by a simple sol‐solvothermal method. Mix an ethanol solution of tetrabutyl titanate and metal nitrate solution to obtain a homogeneous sol, which is then subjected to solvothermal treatment. After calcination, the metal‐TiO2 naoncomposite was obtained. Selected transition metal precursors, including Cu, Fe, Ag, Cr, Co and Zn, were doped into TiO2 nanocatalysts to assess photocatalytic degradation activities. The results show that 1 mol % Ag−TiO2 photocatalyst has a larger specific surface area, a stable anatase phase and the narrowest forbidden band energy (3.00 eV). In photocatalytic degradation of methyl orange (MO) tests, 1 mol % Ag−TiO2 could reach 100 % decolourisation after 70 min and 75.43 % mineralisation after 90 min. ESR analysis confirmed that Ag doping significantly increased the content of ⋅O2− and ⋅OH for the TiO2 catalyst, which are responsible for the oxidation reactions and consequently degradation of pollutants. The photocatalytic degradation mechanism of MO was also proposed. The TOC analyses confirmed the mineralization of MO. The excellent thermal and chemical stability of 1 mol % Ag−TiO2 has also been demonstrated by thermogravimetric analysis and cycling experiments. Electrochemical tests have also demonstrated the excellent electrochemical properties of 1 mol % Ag−TiO2.

Enhanced Photodegradation of Methyl Orange with Tio2 Nanoparticles Using A Triboelectric Nanogenerator

Enhanced Visible-Light-Induced Photoelectrocatalytic Degradation of Methyl Orange by Cds Sensitized Tio2 Nanotube Arrays Electrode

Exploration of the active species in the photocatalytic degradation of methyl orange under UV light irradiation

Enhanced Optical and Photocatalytic Properties of Ag Quantum Dots-Sensitized Nanostructured TiO2/ZnO Heterojunctions

Photocatalytic degradation of methyl orange using a TiO2/Ti mesh electrode with 3D nanotube arrays.

TiO2 Nanoparticles Supported on PMMA Nanofibers for Photocatalytic Degradation of Methyl Orange

Fabrication of Fe2O3/TiO2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Electrocoagulation-Tio2 Photo-Assisted Combined System Applied to Methyl Orange Wastewater Removal

Towards Methyl Orange Degradation by Direct Sunlight Using Coupled TiO2 Nanoparticles and Carbonized Cotton T-shirt

Photoelectrochemical Degradation of Methyl Orange by TiO2 Nanopore Arrays Electrode and Its Comparison with TiO2 Nanotube Arrays Electrode

High performance photocatalyst TiO2@UiO-66 applied to degradation of methyl orange

Fabrication of Fe 2 O 3 /TiO 2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation: Fabrication of Fe 2 O 3 /TiO 2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Photodegradation of an Azo Dye Using Immobilized Nanoparticles of TiO2 Supported by Natural Porous Mineral.

Enhanced Photocatalytic Degradation of Methyl Orange by Metal‐Tio2 Nanoparticles

Fabrication of Fe<SUB>2</SUB>O<SUB>3</SUB>/TiO<SUB>2</SUB> Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Efficient Separation of Electron–Hole Pairs in Graphene Quantum Dots by TiO2 Heterojunctions for Dye Degradation

Electrocatalytic Degradation of Methyl Orange on PbO 2-Tio 2 Nanocomposite Electrodes

Photocatalytic degradation of methyl orange in aqueous suspension of mesoporous titania nanoparticles

High-Efficiency Wastewater Purification System Based on Coupled Photoelectric–Catalytic Action Provided by Triboelectric Nanogenerator

Enriched photocatalytic degradation of methylene orange dye using carbon quantum dots surface-decorated TiO 2 nanocomposites

Study on the Improvement of the Degradation Efficiency of Methylene Blue Using Pulsed Direct-Current Self-Power Supply