An Automatic Flow-injection Micro-electrode Electrochemical Analysis System for Simultaneous Determination of Four Kinds of Serum Electrolytes
Zhou Lei,Lai Zhen-Yao,Zhang Hui-Sheng,Gao Xiu-Feng,Li Yong-Sheng
DOI: https://doi.org/10.3724/SP.J.1096.2011.00809
IF: 1.193
2011-01-01
Chinese Journal of Analytical Chemistry
Abstract:A new automatic analysis method and system for simultaneous determination of K+, Na+, Cl- and C2+ in serum was proposed on the basis of flow-injection micro-electrode dynamic electrochemical technology (FI-ME-ECA). To stabilize baseline potentials of four electrodes and to accelerate response of the electrodes, we have examined various components in the carrier of the FI-ME-ECA and optimized experimental conditions. Obtained results were as follows: 23 mmol/L, of Na2B4 O-7-H3BO3 (pH 7. 40) was used as the buffer solution, the carrier solution are consist of 0. 25 mmol/L K+, 48.6 mmol/L Na+, 2.5 mmol/L Cl- and 0.25 mmol/L Ca2+, and its flow rate is selected 1.56 mL-/min. The length of mixing coil was 30 cm (I. D. 0. 5 mm). The linear determination ranges of the method are 3.0-6.0 mmol/L for K+, 90-253 mmol/L. for Na+, 20-248 mmo/L- for Cl- and 0.35-10 mmol/L for Ca2+, respectively, the relative standard deviation (RSD) is less than 1.1% (n=11), the recoveries obtained by adding K+, Na+, Cl- and C2+ in serum samples are in range of 96. 7% 103. 7%, analysis speed of the system is 1.20 samples/h (480 detections/h), consumption of the sample is only 45 mu L at a time. Main merits of the FI-ME-ECA are injection of micro-volume sample and continuous flow of the Carrier solution. It has achieved automatic cleaning of the FIA manifold, and has avoided carryover between the samples, and has removed sorption and stemming of fibrin on the sensor channels, and has prolonged life of the electrodes.