Abstract:Background: The accurate determination of iodine in seawater is essential to understanding its impact environment and human health. Inductively coupled plasma mass spectrometry (ICP-MS) is a widely technique for elemental analysis due to its high sensitivity, speed, and low limit of detection (LOD). However, capability in the detection of iodine in complex matrix samples is still limited by the low sample introduction efficiency of pneumatic nebulization and the high ionization energy of iodine. Dielectric barrier microplasma-induced vapor generation (DBD-mu PIVG) is a sample introduction technique that has been coupled with atomic spectrometry due to its high vapor generation efficiency, rapid reaction speed, interference capability, and environmental friendliness. Results: A new method was developed for the rapid and sensitive determination of iodine using DBD-mu PIVG coupled with ICP-MS. The DBD-mu PIVG sample introduction technique can convert both iodide and iodate volatiles with a vapor generation efficiency of 70 %. The experimental conditions were optimized in the LOD for iodine was 0.04 mu g L- 1 , which was lower compared to pneumatic nebulization and comparable that after the extraction treatment. The relative standard deviation (RSD) obtained after 11 replicate determinations was 2.4%. Furthermore, the potential mechanism and anti-interference performance of the proposed method were also carefully investigated. Significance: Compared to other analytical methods for iodine analysis, this approach is environmentally friendly, exhibits high anti-interference capability and enables accurate determination of iodine in complex matrix samples. The high vapor generation efficiency of DBD-mu PIVG improves the sensitivity for iodine detection and expands the applicable elemental range of DBD-mu PIVG. Finally, the proposed method was successfully applied to analyze the iodine content in seawater samples obtained from the Chinese coastal waters and retains great potential for assessing the distribution of iodine in different sea areas.

The Development of a Flow Injection Analysis System Based on Iodide Ion Selective Electrode

Chitosan/Colloid Au Modified Gold Film Microelectrode For Iodide Determination

Research on Automatic Analyzer for Determining Trace-level Sodium Based on Flow-injection Ion-selective Electrode Method

Flow injection analysis with amperometric detection for iodide determination as a tracer in seawater reservoirs

Determination of iodine species in seaweed and seawater samples using ion-pair reversed phase high performance liquid chromatography coupled with inductively coupled plasma mass spectrometry

Modeling and Validation of the Iodine‐sulfur Hydrogen Production Process

SEMI-DIFFERENTIAL VOLTAMMETRIC DETERMINATION OF TRACE AMOUNTS OF IODIDE WITH CHITOSAN MODIFIED PLATINUM ELECTRODE

Design of Integrated Laboratory-Scale Iodine Sulfur Hydrogen Production Cycle at Inet

Flow Injection Analysis Method with On-Line Resin Separation for Determining Trace Fe(II) and Fe(II + III) Using Catalytic Spectrophotometry

Simultaneous determination of K+/Na+/Ca2+/Cl- in seawater and geothermal water with flow-injection serial-ion selective electrodes

Development of an Integrated Syringe-Pump-Based Environmental-Water Analyzer (isea) and Application of It for Fully Automated Real-Time Determination of Ammonium in Fresh Water

Spectrophotometric flow injection determination of trace iodide in table salt and laver through the reaction of iodate with 3,5-Br2-PADAP and thiocyanate

A Detection Method for HIx Composition in Thermochemical Water Splitting Iodine–sulfur Cycle

Study on the Determination of Trace Iodine by Flow Injection Catalytic Kinetic Spectrophotometry

Improving the measurement of total dissolved sulfide in natural waters: A new on-site flow injection analysis method

Determination of Trace Sodium in the Water-Steam System of Power Plants Using an FIA/ISE Method with an Automatic Penetration and Alkalization Apparatus

Dielectric Barrier Discharge-Induced Chemical Vapor Generation for Highly Sensitive Analysis of Iodine in Seawater by ICP-MS

Spectrophotometric determination of trace iodide by flow injection analysis

Development of a Sequential Injection Analysis Device and Its Application for the Determination of Mn(II) in Water.

Application of Ion Chromatography for Determination of Iodine in a variety of Water

Determination of Trace Copper in Circulating Cooling Water Based on Flow-Injection and Ion Selective Electrode Technology