Abstract:Abstract Heat pipes are passive heat transfer systems and serve as an effective thermal management solution for electronic devices. The adaptability of heat pipes makes these suited for a wide application range, especially in the field of electronic thermal management. The current study highlights the transient numerical analysis of wickless heat pipes (thermosyphons) for the thermal management of electronic devices. The thermal performance of the thermosyphon is analyzed using both copper oxide (CuO) and aluminum oxide (Al2O3) nanofluids with their concentrations at 1% and 5%. Deionized (DI) water is employed as a reference case for comparison. The study is carried out for variable heat inputs to the thermosyphon ranging 10–50 W for a time interval of 30 s. The idea is to analyze the effect of the evaporator heat input and the nanoparticles concentration on the temperature, heat transfer coefficient, thermal resistance, and effective thermal conductivity of the heat pipe. The results indicate that CuO nanoparticles at a 5% concentration lead to a maximum thermal resistance reduction of 4.31% at 50 W, while alumina nanoparticles at the same concentration lead to a more substantial reduction of 6.66% at the same heat load. The evaporator temperature varies between 377.52 K to 374.99 K using deionized water, and 376.95 K to 374.29 K using CuO nanofluid (at 1% concentration). The heat pipe's evaporator attains its highest convective heat transfer coefficient (437.91 W/m2K) by using alumina nanofluid with 1% nanoparticle concentration at 50 W. Moreover, the effective thermal conductivity of the heat pipe is enhanced by 5% and 7% for copper oxide and aluminum oxide nanofluids (with 5% concentration), respectively, at 50 W. Thus, the nanofluids play a significant role in improving the efficiency and reliability of electronic components. These findings demonstrate the potential of using the nanofluids in thermosyphons to enhance their thermal performance in electronic cooling applications.

Heat Transfer Mechanism of Miniature Loop Heat Pipe with Water-Copper Nanofluid: Thermodynamics Model and Experimental Study

Experimental Investigation on the Heat Transfer Performance and Evaporation Temperature Fluctuation of a New-Type Metal Foam Multichannel Heat Pipe

Analysis of the mechanism of enhanced heat transfer by nanofluids

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Effects of using nanofluids on thermal performance and mass transfer in a micro-flat plate heat pipe

Heat Transfer and Nanofluids Flow Through the Circular Concentric Heat Pipes: a Comparative Study Using Least Square Method (LSM)

Numerical Investigation on Thermal Performance of Nanofluid-Assisted Wickless Heat Pipes for Electronic Thermal Management

Heat Transfer Characteristics of a New Type of Copper Wire-Bonded Flat Heat Pipe Using Nanofluids

Experimental Study of Heat Pipeof Nanometer Particles

Effects of Nanoparticle Parameters on Thermal Performance of the Evaporator in A Small Capillary Pumped Loop Using Nanofluid

Molecular Dynamics Study of Phase Transition Heat Transfer in Water Nanofilm on Nanorough Surfaces

Experimental investigation of a loop heat pipe with a flat evaporator and cupric oxide nanofluids as working fluid

Visualization Study on the Enhancement of Heat Transfer for the Groove Flat-Plate Heat Pipe with Nanoflower Coated CuO Layer

Numerical Simulations of the Liquid-Vapor Phase Change Dynamic Processes in a Flat Micro Heat Pipe

Experimental Study on Boiling of Nanofluids in Copper Foam

Experimental Investigation of Thermal Performance of Miniature Heat Pipe Using SiO2-Water Nanofluids

On the temperature effect of nanofluid thermal conductivity by molecular dynamics simulation

A numerical simulation validated experimentally for thermally developing convection characteristics of a phase change nanofluid flow in a circular tube

Enhancement of Loop Heat Pipe Performance with the Application of Micro/nano Hybrid Structures

The Rapid Boiling of Thin Liquid Films with Different Thicknesses on Nanochannel Copper Plates: A Molecular Dynamics Study

Computational investigation of heat transfer in a flow subjected to magnetohydrodynamic of Maxwell nanofluid over a stretched flat sheet with thermal radiation