Abstract:Pressure-swing distillation (PSD) is an alternative configuration used to separate pressure-sensitive azeotropes and avoid product contamination(s) in extractive or heterogeneous azeotropic distillation via the entrainer(s). Full heat integration between high- and low-pressure columns (HPC and LPC) can provide significant energy savings compared to the conventional case, while it also loses the control degree of freedom, trim condenser or reboiler heat load, via the integrated condenser/reboiler exchanger. Typically, the pressure of HPC is left uncontrolled, and additional pressure-compensated control strategies are implemented, which may create safety issues. To address this, the study proposes adding an auxiliary cooling-water-driven condenser to the fully heat-integrated PSD system, providing an extra manipulated variable to regulate the pressure of HPC. Compared to the conventional PSD system, the new modified process could achieve a 26.31% reduction in total annual cost. The research uses the maximum-boiling azeotropic mixture of acetone/chloroform as a case study which makes the distillation system characterized by high reflux ratios and a large recycle flow rate, leading to the unwelcome snowball effect. To achieve effective process control, robust control structures are proposed that rigorously regulate the pressure of the column by manipulating the heat removal in the trim condenser, attenuating or eliminating potential overpressure issues. Product purity and other evaluation indicators, such as product transient deviations, offsets, integral absolute error, and oscillation degrees, are also considered. Results show that the proposed control schemes can efficiently control the pressure of HPC, weaken the snowball effect, and maintain product purity. This study highlights the importance of pressure control for fully heat-integrated PSD systems, particularly for pressure-sensitive azeotropes with small pressure-induced shifts.

New Pressure-Swing Distillation for Separating Pressure-Insensitive Maximum Boiling Azeotrope Via Introducing A Heavy Entrainer: Design and Control

Control of fully heat-integrated pressure-swing distillation with strict pressure manipulation: A case study of separating a maximum-boiling azeotrope with small pressure-induced shift

Adding Rectifying/Stripping Section Type Heat Integration to A Pressure-Swing Distillation (psd) Process

Design and Control of a Fully Heat-Integrated Pressure-Swing Azeotropic Distillation System

Design and control of an ideal heat-integrated distillation column (ideal HIDiC) system separating a close-boiling ternary mixture

Design and Control of Pressure-Swing Distillation for Separating Ternary Systems with Three Binary Minimum Azeotropes

Process Design and Multi-Objective Optimization of Efficient Heat Utilization Distillation Based on the Influence of Pressure and Entrainer Flow on Separation Performance

Design and comprehensive analysis of a novel pressure-swing batch distillation process for the separation of a binary azeotrope with various boiling behaviors

Control of a Pressure-Swing Distillation Process for Benzene/isopropanol/water Separation with and Without Heat Integration

Improved Design and Optimization for Separating Azeotropes with Heavy Component As Distillate Through Energy-Saving Extractive Distillation by Varying Pressure

Design and Control of Dimethyl Carbonate–Methanol Separation Via Pressure-Swing Distillation

Separating an Azeotropic Mixture of Toluene and Ethanol Via Heat Integration Pressure Swing Distillation

A simulation study on selection of optimized process for azeotropic separation of methanol and benzene: Internal heat integration and economic analysis

Control of the azeotropic distillation process for separation of acetonitrile and water with and without heat integration

An advanced optimization strategy for enhancing the performance of a hybrid pressure-swing distillation process in effective binary-azeotrope separation

The process control of the triple-column pressure-swing extractive distillation with partial heat integration

Process design and intensification of multicomponent azeotropes special distillation separation via molecular simulation and system optimization

Energy-efficient Separation of a Ternary Azeotropic Mixture Via Azeotropic Reflux-Induced Sequences Based on the Intensified Pressure-Swing Distillation

Systematic design of an extractive distillation for maximum‐boiling azeotropes with heavy entrainers

Improved design and optimization for separating tetrahydrofuran–water azeotrope through extractive distillation with and without heat integration by varying pressure

Economically and thermodynamically efficient heat pump-assisted side-stream pressure-swing distillation arrangement for separating a maximum-boiling azeotrope