Abstract:Heavy metals in industrial wastewaters are typically present as stable metal–organic complexes with their cost-effective treatment remaining a significant challenge. Herein, a self-enhanced decomplexation scenario is developed using an electrochemical membrane filtration (EMF) system for efficient decomplexation and Cu recovery. Using Cu-EDTA as a model pollutant, the EMF system achieved 81.5% decomplexation of the Cu-EDTA complex and 72.4% recovery of Cu at a cell voltage of 3 V. The •OH produced at the anode first attacked Cu-EDTA to produce intermediate Cu-organic complexes that reacted catalytically with the H2O2 generated from the reduction of dissolved oxygen at the cathode to initiate chainlike self-enhanced decomplexation in the EMF system. The decomplexed Cu products were further reduced or precipitated at the cathodic membrane surface thereby achieving efficient Cu recovery. By scavenging H2O2 (excluding self-enhanced decomplexation), the rate of decomplexation decreased from 8.8 × 10–1 to 4.1 × 10–1 h–1, confirming the important role of self-enhanced decomplexation in this system. The energy efficiency of this system is 93.5 g kWh–1 for Cu-EDTA decomplexation and 15.0 g kWh–1 for Cu recovery, which is much higher than that reported in the previous literature (i.e., 7.5 g kWh–1 for decomplexation and 1.2 g kWh–1 for recovery). Our results highlight the potential of using EMF for the cost-effective treatment of industrial wastewaters containing heavy metals.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c05554?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c05554</a>.Section S1: Assembly of the membrane module; Section S2: Setup of the EMF reactor; Section S3: Setup of the H-type two-compartment electrochemical cell; Section S4: Characterizations of the titanium mesh and conductive membrane; Section S5: Membrane properties of the conductive membrane; Section S6: Filtration test of the conductive membrane using real wastewater; Section S7: Evolution of H2O2 concentration during each experiment; Section S8: TMP evolution during the experiment; Section S9: Rate constants obtained in the two-compartment cell experiment; Section S10: Desorption results of each experiment; Section S11: Intermediates formed at different voltages; Section S12: Decomplexation experiments of each Cu-organic complex; Section S13: Evolution of the Cu(I) species concentration during each experiment; Section S14: Probability of decomplexation or reduction/precipitation of certain intermediates; Section S15: Cyclic voltammograms under an anodic scan; Section S16: Decomplexation and Cu recovery performance in the treatment of real wastewater; Section S17: mass transfer rate constant calculation; and Section S18: Energy efficiency and EE/O calculation (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c05554/suppl_file/es0c05554_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Poly(acrylic Acid-Co-maleic Acid) for the Enhanced Treatment of Cu (Ii)-Loaded Aqueous Solution and Its Reuse by Ultrafiltration–electrolytic Process

Metal cation removal by P(VC-r-AA) copolymer ultrafiltration membranes

Positively Charged PVC Ultrafiltration Membrane Via Micellar Enhanced Ultrafiltration for Removing Trace Heavy Metal Cations

TAP/GMA@CN Metal-Chelating Membrane for Enhanced and Efficient Capture of Cu(II)

A Positively Charged Tight UF Membrane and Its Properties for Removing Trace Metal Cations Via Electrostatic Repulsion Mechanism.

Enhanced and Efficient Removal of Heavy Metals by Amino-Decorated Membranes in Coordination with Multi-Function

A novel tetraethylenepentamine functionalized polymeric adsorbent for enhanced removal and selective recovery of heavy metal ions from saline solutions

Selective Removal of Cu2+ Ion in Aqueous Solution by Poly (acrylic Acid/Acrylamide) Hydrogel

Membrane Extraction For Separation Of Copper Cations From Acid Solution Using Polypropylene Hollow Fibre Membrane

Eco-Friendly and Cost-Effective Superabsorbent Sodium Polyacrylate Composites for Environmental Remediation

Dialysis Technology Supporting the Preparation of Acid-Resistant Picolylamine-Based Hydrogel Sphere for Selectively Recycling Copper, Nickel and Cobalt from Strongly Acidic Wastewaters

Citric Acid Enhanced Copper Removal by a Novel Multi-amines Decorated Resin

Separation of Copper and Nickel Metal Ions from Electroplating Wastewater by Ultrafiltration with Tartaric Acid and Sodium Citrate Reinforced Sodium Polyacrylate Complexation

Ion-exchangeable and sorptive reinforced membranes for efficient electrochemical removal of heavy metal ions in wastewater

Selective Removal of Iron, Lead, and Copper Metal Ions from Industrial Wastewater by a Novel Cross-Linked Carbazole-Piperazine Copolymer

Mixed Matrix PVDF Membranes With in Situ Synthesized PAMAM Dendrimer-Like Particles: A New Class of Sorbents for Cu(II) Recovery from Aqueous Solutions by Ultrafiltration

Preparation of Zwitterionic Hybrid Polymer and Its Application for the Removal of Heavy Metal Ions from Water.

Reusable Polyacrylonitrile‐Sulfur Extractor of Heavy Metal Ions from Wastewater (Adv. Funct. Mater. 51/2021)

High-efficiency adsorption removal for Cu(II) and Ni(II) using a novel acylamino dihydroxamic acid chelating resin

Exclusive Separation of Cu(II) with Aminophosphonic Acid-Functionalized Hydrogel from Strong Acidic Media

Self-Enhanced Decomplexation of Cu-Organic Complexes and Cu Recovery from Wastewaters Using an Electrochemical Membrane Filtration System