Abstract:Biodiesel is a family of renewable engine fuels with carbon-neutral nature. In this work, threeC(5)H(10)O(2) esters (methyl butanoate, methyl isobutanoate and ethyl propanoate), which can serve as model compounds of biodiesel and represent linear and branched methyl esters and linear ethyl esters, were investigated to characterize their laminar flame propagation characteristics up to 10 atm and unravel the effects of isomeric fuel structures. A high-pressure constant-volume cylindrical combustion vessel was used to achieve laminar burning velocity measurements at 1-10 atm, 423 K and equivalence ratios of 0.7-1.5, while comparative experimental work was performed on a heat flux burner at 1 atm, 393 K and equivalence ratios of 0.7-1.6 for methyl butanoate and ethyl propanoate. The laminar burning velocity generally decreases with increasing pressure and increases in the order of methyl isobutanoate, methyl butanoate and ethyl propanoate, which shows distinct fuel isomeric effects. A kinetic model of C5H10O2 esters was developed and validated against the new data in this work and previous data in literature. Modeling analyses were performed to provide insight into the fuel-specific flame chemistry of the three esters isomers. Remarkable differences in radical pools of three ester isomers are concluded to be responsible for the observed fuel isomeric effects on laminar flame propagation. The feature of two ethyl groups connected to the ester group in ethyl propanoate facilitates the ethyl production and inhibits the methyl and allyl production, making it propagate fastest among the three isomers. The branched structure feature of methyl isobutanoate with methyl and i-propyl groups connected to the ester group prevents the ethyl formation and results in considerable CH3 and allyl production, which decelerates its laminar flame propagation. (C) 2022 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Viscosity modeling of some oxygenated fuels

Viscosity of Oxygenated Fuel: A Model Based on Eyring's Absolute Rate Theory

A Viscosity Model for Oxygenated Fuel

Experimental and Modeling Investigations of Density and Viscosity for the Ternary (N-Octane Plus Ethylcyclohexane Plus Ethylbenzene) Mixtures

Experimental and Modeling Investigations of Density and Viscosity for the Ternary ( N -Octane + Ethylcyclohexane + Ethylbenzene) Mixtures

Viscosities of Fatty Acid Esters: A Study on Various Semi-Empirical Models

Association Effect on the Density, Viscosity and Excess Properties of Fatty Acid Ester + Alcohol Mixtures: Experiment and Modeling

General Models for Prediction Densities and Viscosities of Saturated and Unsaturated Fatty Acid Esters

Experimental Measurement and Modeling of the Viscosity of Dimethyl Ether

Comparative Research on Laminar Flame Propagation for Four C8 Fuels

Molecular dynamics study on the kinematic viscosity, density and structure of fuel blends containing n-decane and biofuel compound of ethyl decanoate or ethyl dodecanoate

An Experimental and a Kinetic Modelling Study of Ethanol/Acetone/Ethyl Acetate Mixtures

Evaluation of Predictive Models for the Viscosity of Biodiesel

On the Laminar Flame Propagation of C5H10O2 Esters Up to 10 Atm: A Comparative Experimental and Kinetic Modeling Study

Density And Viscosity Of Ternary Mixture Of Cyclopentanol Plus Exo-Tetrahydrodicyclopentadiene+1,3-Dimethyladamantane

Model for predicting volatility of fuel blends

Densities, viscosities and refractive indices of binary liquid mixtures of methyl tert-butyl ether or ethyl tert-butyl ether with a hydrocarbon fuel

Prediction models for density and viscosity of biodiesel and their effects on fuel supply system in CI engines

Molecular dynamics study on viscosities of sub/supercritical n-decane, n-undecane and n-dodecane

Prediction of Kinematic Viscosities for Binary Mixtures Containing Ethers by ASOG-VISCO Model

Modeling the spray characteristics of blended fuels for gasoline direct injection applications