Mercury Adsorption Performance by Modified Mulberry Twig Chars

SHU Tong,LU Ping,HE Nan,WANG Qinchao

DOI: https://doi.org/10.3969/j.issn.0438-1157.2013.04.040

2013-01-01

Abstract:Several mulberry twig(MT)chars were prepared by conventional pyrolysis,steam activation,and impregnation with H2O2,ZnCl2 and NaCl.Adsorption performance of mercury in a simulated flue gas by MT chars were studied in a bench-scale fixed bed absorber,and the effects of steam activation,impregnation agent,adsorption temperature,and the composition of simulated flue gas,etc.on mercury adsorption performance were analyzed.The results indicated that steam activation could significantly increase surface areas of MT pyrolysis chars.Impregnation with H2O2 can further improve surface areas of steam activated MT chars and its pore structure.However,impregnation with ZnCl2 and NaCl led to decrease of surface areas,D-R micro-pore and total pore volume of MT chars in some extent.The mercury adsorption capacities of MT chars impregnated with 10% and 30% H2O2 were 2.02 and 1.77 times of that for steam activated MT char,respectively,and that of MT char impregnated with ZnCl2 was a little better than that impregnated with NaCl at the same impregnation concentration.The performance of mercury adsorption enhanced with increase of ZnCl2 concentration for modified MT char.The mercury adsorption for MT600-A-ZnCl2(5%) was 29.55 μg·g-1,3.37 times of that for steam activated MT char.At temperature of 60—120℃,the mercury adsorption efficiency and capacity of MT chars impregnated with H2O2 decreased with increase of adsorption temperature.However,the capacity of MT chars impregnated with ZnCl2 showed an increase trend at first and then decrease,and its optimum adsorption temperature was 90℃.SO2 and NO in the simulated flue gas showed adverse effect on mercury adsorption.Both mercury adsorption efficiency and capacity decreased slightly with increase of SO2 and NO concentration.