Abstract:In this paper, a multichannel reconfigurable EEG acquisition system with novel flexible dry electrodes is proposed. The novel electrode is designed to overcome the limitations of conventional wet electrodes such as skin irritation, skin preparation, and conductive gel requirements. It is based on the conductive and stretchable Ag NWs/PDMS composite material and produced by 3D printing technology. Meanwhile, a portable reconfigurable 8-channel EEG acquisition system based on the analog front end ADS1299 is proposed to overcome the drawbacks of traditional EEG acquisition system such as, large in size, difficult to configure, and complicated to use. It can be reconfigured by adjusting the gain of system and sampling rate. To verify the performance of proposed electrodes, a comprehensive test including electrode characterization and signal quality measurement is performed in comparison with Ag/AgCl electrode and Gold Cup electrode. Experiments reveal that proposed electrode achieves favorably results with wet electrodes. Furthermore, the proposed EEG acquisition system with novel dry electrodes is evaluated and compared with the commercial product. The evoked EEG signals (the steady-state visual evoked potentials, SSVEP) acquisition tasks of the proposed system are also conducted. Experimental results exhibit that proposed system satisfies the requirements of multi-channel EEG acquisition and provides a portable and comfortable way for EEG acquisition. With the high-quality sensing ability of the novel electrodes and the programmable gain amplifier of the proposed system, it can be expected to acquire the physiological signals like the electrocardiogram (ECG) and electromyogram (EMG) in the future.

An EEG Acquisition System with Dynamic DC Suppression

A 49nV/√Hz 87.8dB-SNDR 4-Channel Digital Active Electrode System for Gel-Free and Motion-Tolerant Wearable EEG Acquisition.

An Active Electrode Readout Circuit

A 160μW 8-channel active electrode system for EEG monitoring.

An 800MΩ-Input-Impedance 95.3dB-DR Δ-ΔΣ AFE for Dry-Electrode Wearable EEG Recording

A $160~\mu {\rm W}$ 8-Channel Active Electrode System for EEG Monitoring

Low-noise High Input Impedance 8-Channels Chopper-Stabilized EEG Acquisition System

Low Noise, High Input Impedance Digital-Analog Hybrid Offset Suppression Amplifier for Wearable Dry Electrode ECG Monitoring

A Design of EES Analog Pre-processing Circuit

A Low-Noise Low-Power Amplifier for Electroencephalogram Recording

A Digitally Trimmable Low-Noise Low-Power Analog Front-End for EEG Signal Acquisition

High Precision AFE Design Methodology for Wearable EEG Acquisition

BEATS: An Open-Source, High-Precision, Multi-Channel EEG Acquisition Tool System

Compact Wireless Eeg System with Active Electrodes for Daily Healthcare Monitoring

A 108 dB DR Δ∑-∑M Front-End With 720 mVpp Input Range and >±300 mV Offset Removal for Multi-Parameter Biopotential Recording.

A 11G-Input-Impedance 700mV<sub>pp</sub>-Input-Signal-Range 87dB-SNDR Direct-Digitization AFE for Wearable EEG Recording

A Multichannel EEG Acquisition System With Novel Ag NWs/PDMS Flexible Dry Electrodes

A 700µW 8-channel EEG/contact-impedance acquisition system for dry-electrodes

24.7 A 60nv/&#x221a;hz 15-Channel Digital Active Electrode System for Portable Biopotential Signal Acquisition

A 15-Channel Digital Active Electrode System for Multi-Parameter Biopotential Measurement

Active Electrodes for Wearable EEG Acquisition: Review and Electronics Design Methodology