Effects Of Beta-Nucleating Agent And Crystallization Conditions On The Crystallization Behavior And Polymorphic Composition Of Isotactic Polypropylene/Multi-Walled Carbon Nanotubes Composites
Jian Kang,Jinghan He,Zhengfang Chen,Feng Yang,Jinyao Chen,Ya Cao,Ming Xiang
DOI: https://doi.org/10.1002/pat.3416
IF: 3.348
2015-01-01
Polymers for Advanced Technologies
Abstract:In this study, the effects of crystallization conditions (cooling rate and end temperature of cooling) on crystallization behavior and polymorphic composition of isotactic polypropylene/multi-walled carbon nanotubes (iPP/MWCNTs) composites nucleated with different concentrations of -nucleating agent (tradename TMB-5) were investigated by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and scanning electronic microscopy (SEM). The results of DSC, WAXD and SEM revealed that the addition of MWCNTs and TMB-5 evidently elevates crystallization temperatures and significantly decreases the crystal sizes of iPP. Because of the competition between -nucleation (provided by MWCNTs) and -nucleation (induced by TMB-5), the -phase crystallization takes place only when 0.15wt% and higher concentration of TMB-5 is added. Non-isothermal crystallization kinetics study showed that the crystallization activation energy E of -nucleated iPP/MWCNTs composites is obviously higher than that of pure iPP, which slightly increases with the increase of TMB-5 concentration, accompanying with the transition of its polymorphic crystallization behavior. The results of non-isothermal crystallization and melting behavior suggested that the cooling rate and end temperature of cooling (T-end) are important factors in determining the proportion and thermal stability of -phase: Lower cooling rate favors the formation of less amount of -phase with higher thermal stability, while higher cooling rate encourages the formation of higher proportion of -phase with lower thermal stability. The T-end=100 degrees C can eliminate the - recrystallization during the subsequent heating and therefore enhance the thermal stability of the -phase. By properly selecting TMB-5 concentration, cooling rate and T-end, high -phase proportion of 88.9% of the sample was obtained. Copyright (c) 2014 John Wiley & Sons, Ltd.