Abstract:Manufacture and characterization results of nanocomposites based on a polyamide 6/polyamide 12 blend and multi‐walled carbon nanotubes. Nanocomposites based on an immiscible blend of polyamide 6 (PA6) and polyamide 12 (PA12) 50/50 wt.% with different contents of multi‐walled carbon nanotubes (MWCNTs) were prepared by extrusion followed by compression molding. These materials have been proved to be electrically conductive in previous investigations for the range of filler content assayed. The morphology of the nanocomposites was analyzed using scanning electron microscopy, both on cryo‐fractured and postmortem uniaxial tensile samples. Rheological measurements were performed along with differential scanning calorimetry, to assess the materials microstructure and thermal transitions. Furthermore, uniaxial tensile tests were carried out to determine mechanical properties such as stiffness, strength, and strain at break and to investigate the effect of MWCNTs on these properties. Finally, fracture tests were also conducted to evaluate how incorporating MWCNTs affected nanocomposites toughening capabilities. The obtained results suggest a notable improvement in the mechanical properties in the nanocomposites with low amounts of nanofiller. This expands their potential applications as conductive polymer composites (CPCs) and positions them as promising multifunctional materials. Highlights CPCs based on a PA blend and MWCNTs were successfully obtained. CNTs strongly affected the blend morphology and rheological properties. CNTs significantly modified the crystallization behavior of PA6. Ductility greatly improved at low CNT contents but decreased at high loadings. Stiffness increased steadily with increasing CNT content.

Morphology and electrical properties of polyamide 6/polypropylene/multi-walled carbon nanotubes composites

Electric Conductivity and Thermorheology Properties of Polyacrylonitrile/Nylon6 Composites Filled with Carbon Black

Investigation on the Multiwalled Carbon Nanotubes Reinforced Polyamide 6/polypropylene Composites

Morphology and Mechanical Properties of Multiwalled Carbon Nanotubes Reinforced Nylon-6 Composites

Thermally Conductive Composites Obtained by Carbon Nanotubes Filling Immiscible Polyamide 6/Poly (phenylene sulfide) Blends

Comparative study on the electrical, thermal, and mechanical properties of multiwalled carbon nanotubes filled polypropylene and polyamide 6 micromoldings

Enhanced Dielectric Properties Of Polyamide 11/Multi-Walled Carbon Nanotubes Composites

High Electrical Conductivity of Nylon 6 Composites Obtained with Hybrid Multiwalled Carbon Nanotube/carbon Fiber Fillers

Fabrication and properties of conductive MWCNTs/PA6 composites

Multifunctional nanocomposites based on a polyamide 6/polyamide 12 blend and multi‐walled carbon nanotubes

Melt rheological properties of nylon 6/multi-walled carbon nanotube composites

Effect of Compounding Sequence on Localization of Carbon Nanotubes and Electrical Properties of Ternary Nanocomposites

Nylon 6 induced morphological developments and electrical conductivity improvements of polypropylene/carbon black composites

Morphology, thermal, and rheological behavior of nylon 11/multi-walled carbon nanotube nanocomposites prepared by melt compounding

Preparation Of Conductive Polyphenylene Sulfide/Polyamide 6/Multiwalled Carbon Nanotube Composites Using The Slow Migration Rate Of Multiwalled Carbon Nanotubes From Polyphenylene Sulfide To Polyamide 6

Preparation and Electrical Conductivity of Composites of Pa66 Filled with Carbon Nanotubes

Influence of Carbon Nanotubes with Different Functional Groups on the Morphology and Properties of Ppo/Pa6 Blends

Preparation and electrically conductive behavior of multiphase composites of carbon nanotube/polyethylene/polystyrene

Improvement of the thermal/electrical conductivity of PA6/PVDF blends via selective MWCNTs-NH2 distribution at the interface

Study on Conductive Mechanism of Composites―Sulfonated Polyphenylacetylene / Multiwalled Carbon Nanotubes

Morphology and properties of functionalised MWNT/polypropylene composites