Abstract:Electrospinning as a cost-effective process to synthesize nanofiber with controlled morphology and structure has regained attention in the last decade as result of rapid advancements in nanoscale science and engineering and their applications. Although there are a few works demonstrated the ability to fabricate nano gas sensor using electrospun nanofibers as sensing materials, there are limited works to show the optimization of the sensing performance by understanding the electron transport properties and their sensing mechanism. The overall objective of this work is to electrospun conducting polymer/insulating polymer composite nanofibers (i.e., (+)- camphor-10-sulfonic acid (HCSA) doped polyanline PANI (conductive) blended with PEO (non-conductive)) with different compositions (i.e., 12 to 68 wt.%) and apply them as chemiresistive sensing material to detect ammonia at room temperature. The diameter, defects, and morphology of nanofibers were adjusted by controlling solution composition, processing parameters and their effect toward the sensing performance were also investigated. Viscosity of electrospinning solutions was found to have a pronounced impact on fiber diameter and morphology of PANI/PEO nanofibers. Diameters around 350nm of different compositions of PANI/PEO nanofibers were achieved, where decreasing solution viscosity by increasing the PANI content resulted in a morphology changing from individual fibers to junctions. Although all the compositions of PANI/PEO nanofibers show semiconducting behavior and fit a three dimensional variable hopping range model, the activation energy and hopping distance increased as the PANI content decreased. The PANI/PEO nanofibers exhibited excellent sensitivity towards NH3 with fast response and recovery times where a low detection limit of 0.5 ppm with the sensitivity of 5.6 %/ppm of NH3 was achieved from 26 wt.% PANI/PEO nanofibers. Additionally, the PANI/PEO nanofibers response toward water vapor changed from positive to negative indicating the humidity independent ammonia gas sensor can be fabricated by controlling the composition of PANI/PEO nanofibers.

Fabrication of electroactive oligoaniline functionalized poly(amic acid) nanofibers for application as an ammonia sensor

Preparation, modification, morphology tailor and application of conjugated conductive polymer in chemical sensors

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

Facile, Low‐Cost and Flexible Ammonia Sensor Arrays Based on Metallic Ion Charge Carriers and Polymer Matrices

A Cyanine Dye Encapsulated Porous Fibrous Mat for Naked-Eye Ammonia Sensing.

Self‐assembled Core‐shell Structured Organic Nanofibers Fabricated by Single‐nozzle Electrospinning for Highly Sensitive Ammonia Sensors

Enhanced sensing properties of optical ammonia sensor based on electrospun fibers containing Eosin-Y and silver nanoparticles

Synthesis and Electrochemical Properties of Electroactive Hyperbranched Poly(Aryl Ether Ketone) Bearing Oligoaniline Segments

A novel ammonia sensor based on high density, small diameter polypyrrole nanowire arrays

Synthesis and Tunable Properties of Oligoaniline-Functionalized Polyamides

Synthesis and Characterization of Electroactive Fluorinated Poly (amic Acid) Bearing Oligoaniline Pendants

Fabrication of a Ni Foam-Supported Platinum Nanoparticles-Silver/polypyrrole Electrode for Aqueous Ammonia Sensing

Polydiacetylene-embedded supramolecular electrospun fibres for a colourimetric sensor of organic amine vapour

Development of toxic gas sensor from anthocyanin-embedded polycaprolactone- co -polylactic acid nanofibrous mat

Trace Dissolved Ammonia Sensor Based on Porous Polyelectrolyte Membrane-Coated Thin-Core Fiber Modal Interferometer

In-situ Fabrication of Carbon Cloth-Supported Polypyrrole-Platinum Nanosheets for the Electrochemical Detection of Ammonia–nitrogen

Mn-doped ZnO/SnO2-based yarn sensor for ammonia detection

Electrospun Polyaniline Fibers As Highly Sensitive Room Temperature Chemiresistive Sensors for Ammonia and Nitrogen Dioxide Gases

Nanostructured NiO-polyaniline fibers composite smart material as a room temperature ammonia sensor

Fluorinated Polyaniline-Based Sensors with Enhanced NH 3 Sensitivity

Wearable smart yarn sensor based on ZnO/SnO2 heterojunction for ammonia detecting