Abstract:In this paper, a facile hydrothermal combined with subsequent two-step post-calcination method was used to fabricate hematite (α-Fe2O3) nanoarrays on fluorine-doped SnO2 glass (FTO). The morphology, crystalline phase, optical property and surface chemical states of the fabricated α-Fe2O3 photoelectrode were characterized by scanning electron microscopy, X-ray diffraction, ultraviolet visible spectroscopy and X-ray photoelectron spectroscopy correspondingly. The α-Fe2O3 photoelectrode exhibits excellent photoelectrochemical (PEC) response toward hydrogen peroxide (H2O2) in aqueous solutions, with a low detection limit of 20 μM (S/N = 3) and wide linear range (0.01-0.09, 0.3-4, and 6-16 mM). Additionally, the α-Fe2O3 photoelectrode shows satisfying reproducibility, stability, selectivity and good feasibility for real samples. Mechanism analysis indicates, comparing with H2O, H2O2 possesses much more fast reaction kinetics over α-Fe2O3 surface, thus the recombination of photogenerated charges are reduced, followed by much more photogenerated electrons are migrated to the counter electrode via external circuit. The insight on the enhanced photocurrent, which is corelative to the concentration of H2O2 in aqueous solution, will stimulate us to further optimize the surface structure of α-Fe2O3 to gain highly efficient α-Fe2O3 based sensors.

Indium Tin Oxide Electrode Modified by a SH+ Ion Implantation Technique for Direct Electrocatalytic Sensing of Hydrogen Peroxide

A Hydrogen Peroxide Sensor Prepared By Electropolymerization Of Pyrrole Based On Screen-Printed Carbon Paste Electrodes

Direct Electrochemistry and Electrocatalysis of Hemoglobin on an Indium Tin Oxide Electrode Modified with Implanted Carboxy Ions

Copper Oxide Nanoparticles and Ionic Liquid Modified Carbon Electrode for the Non-Enzymatic Electrochemical Sensing of Hydrogen Peroxide

Hydrogen Peroxide Electrochemical Detection for the Development of Protein Film-Modified Sensor

Fabrication of a Hydrogen Peroxide Biosensor Based on a Self-Assemble Composite Oxide Film

Highly Sensitive Hydrogen Peroxide Biosensors Based On Tio2 Nanodots/Ito Electrodes

Dendritic Silver/Silicon Dioxide Nanocomposite Modified Electrodes for Electrochemical Sensing of Hydrogen Peroxide

Electrochemical Detection of Hydrogen Peroxide at the Sputtered Titanium Oxide Electrode

Prussian blue@Au nanoparticles/SiO2 cavity/ITO electrodes: Application as hydrogen peroxide sensor

TiO 2 sol-gel derived amperometric biosensor for H 2 O 2 on the electropolymerized phenazine methosulfate modified electrode

Hydrogel-Based Electrodeposition of Copper Nanoparticles for Selective Detection for Hydrogen Peroxide

Electrochemical Detection of Hydrogen Peroxide Via Hemoglobin–dna/pyterpy-Modified Gold Electrode

Hydrogen peroxide biosensor based on direct electrochemistry of hemoglobin immobilized on gold nanoparticles in a hierarchically porous zeolite

Amperometric biosensor for hydrogen peroxide based on hemoglobin entrapped in titania sol–gel film

Low‐Potential Sensitive Hydrogen Peroxide Detection Based on Nanotubular TiO2 and Platinum Composite Electrode

Photoelectrochemical sensing and mechanism investigation of hydrogen peroxide using a pristine hematite nanoarrays

A MgO Nanoparticles Composite Matrix‐Based Electrochemical Biosensor for Hydrogen Peroxide with High Sensitivity

A Gold Electrode Modified with Hemoglobin and the Chitosan@fe 3 O 4 Nanocomposite Particles for Direct Electrochemistry of Hydrogen Peroxide

Metallic Ir-decorated iridium oxide nanofibers with programmable performance towards non-enzymatic detection of hydrogen peroxide

A hydrogen peroxide biosensor based on the bioelectrocatalysis of hemoglobin incorporated in a kieselgubr film