Abstract:A novel ladder-type dithienonaphthalene (DTN) was designed and synthesized as an electron-rich unit for constructing donor-acceptor copolymers. Different acceptor moieties, including benzo[c][1,2,5]thiadiazole (BT), 5,6-bis(hexyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole (TBT), and 2,5-bis(2-ethylhexyl)-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,SH)-dione (TDPP), were used as electron-deficient units for the target copolymers. These copolymers (PDTNBT, PDTNTBT, and PDTNTDPP) were obtained via the Stile coupling reaction and characterized by H-1 NMR spectroscopy, UV-vis absorption spectroscopy, cyclic voltammetry, and gel permeation chromatography (GPC). Owing to the four solubilizing alkyl chains on the DTN unit, all the three copolymers have good solubility in common solvents. Among these polymers, PDTNTBT exhibits the highest space-charge limit current (SCLC) hole mobility of 2.13 x 10(-5) cm(2) V-1 s(-1), which is beneficial for achieving high performance solar cells. Under the simulated AM 1.5G illumination condition (100 mW/cm(2)), solar cells based on PDTNTBT:PC71BM (1:3, w/w) exhibit a power conversion efficiency (PCE) of 4.8% with a current density of 10.3 mA cm(-2), an open-circuit voltage of 0.86 V, and a fill factor of 54%. With the same device fabrication method, PDTNTDPP:PC71BM (1:3, w/w) and PDTNBT:PC71BM (1:3, w/w) based devices exhibit efficiencies of 1.52% and 2.79%, respectively. Furthermore, inverted solar cells based on these copolymer blends are also fabricated. The inverted devices based on PDTNTDPP:PC71BM (1:2, w/w) and PDTNBT:PC71BM (1:2, w/w) exhibit PCEs of 1.60% and 2.89%, respectively, which are similar to their corresponding conventional devices. And the inverted devices based on PDTNTBT:PC71BM (1:2, w/w) show a higher PCE of 5.0%, and more importantly, they are quite stable as demonstrated by the 4.75% PCE after ambient storage for two months.

Synthesis of Donor–acceptor Copolymers Based on Anthracene Derivatives for Polymer Solar Cells

Synthesis of Anthracene-Based Donor–Acceptor Copolymers with a Thermally Removable Group for Polymer Solar Cells

Synthesis Of Quinoxaline-Based Donor-Acceptor Narrow-Band-Gap Polymers And Their Cyclized Derivatives For Bulk-Heterojunction Polymer Solar Cell Applications

Acceptor–acceptor conjugated copolymers based on perylenediimide and benzothiadiazole for all‐polymer solar cells

Synthesis of Novel Narrow-Band-gap Copolymers Based on [1,2,5]Thiadiazolo[3,4-F]benzotriazole and Their Application in Bulk-Heterojunction Photovoltaic Devices

Donor-acceptor-type copolymers based on a naphtho[1,2-c:5,6-c]bis(1,2,5-thiadiazole) scaffold for high-efficiency polymer solar cells.

Synthesis and Photovoltaic Properties of Copolymers of Carbazole and Thiophene with Conjugated Side Chain Containing Acceptor End Groups

Tetrathienodibenzocarbazole Based Donor–Acceptor Type Wide Band-Gap Copolymers for Polymer Solar Cell Applications

Synthesis and photophysical properties of N-alkyl dithieno[3,2- b:2',3'- d]pyrrole based donor/acceptor-π-conjugated copolymers for solar-cell application

Two-dimensional Like Conjugated Copolymers for High Efficiency Bulk-Heterojunction Solar Cell Application: Band Gap and Energy Level Engineering

Theoretical investigations on donor-acceptor conjugated copolymers based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for organic solar cell applications

Design and synthesis of copolymers of indacenodithiophene and naphtho[1,2- c:5,6- c ]bis(1,2,5-thiadiazole) for polymer solar cells

Synthesis of Two-Dimensional Π-Conjugated Polymers Pendent with Benzothiadiazole and Naphtho[1,2- C :5,6- C ]bis[1,2,5]thiadiazole Moieties for Polymer Solar Cells

Low Band‐gap D–A Conjugated Copolymers Based on Anthradithiophene and Diketopyrrolopyrrole for Polymer Solar Cells and Field‐effect Transistors

Anthracene‐Based Medium Bandgap Conjugated Polymers for High Performance Polymer Solar Cells Exceeding 8% PCE Without Additive and Annealing Process

Donor–acceptor Copolymers Based on Phenanthrene As Electron‐donating Unit: Synthesis and Photovoltaic Performances

Synthesis of Medium Bandgap Copolymers Based on Benzotriazole for Non-Fullerene Organic Solar Cells

Ladder-Type Dithienonaphthalene-Based Donor–Acceptor Copolymers for Organic Solar Cells

Synthesis of D‐A copolymers based on thiadiazole and thiazolothiazole acceptor units and their applications in ternary polymer solar cells

Three Pyrido[2,3,4,5-Lmn]phenanthridine Derivatives and Their Large Band Gap Copolymers for Organic Solar Cells

Novel Medium Band Gap Conjugated Polymers Based on Naphtho[1,2-C:5,6-C]bis[1,2,3]triazole for Polymer Solar Cells