Abstract:Pure iron as a potential bioresorbable material for bioresorbable coronary scaffold has major disadvantages of slow corrosion and bioresorption. However, so far, there are neither quantitative data of long-term in vivo corrosion nor direct experimental evidence for bioresorption of pure iron and its alloys, which are fundamental and vital for developing novel Fe-based alloys overcoming the intrinsic drawbacks of pure iron. This work systemically investigated scaffold performance, long-term in vivo corrosion behavior and biocompatibility of a nitrided iron coronary scaffold and explored its bioresorption mechanism. It was found that the 70 mu m Fe-based scaffold was superior to a state of the art Co-Cr alloy stent (Xience Prime (TM)) in terms of crossing profile, recoil and radial strength. Mass loss was 76.0 +/- 8.5 wt% for the nitrided iron scaffold and 44.2 +/- 11.4 wt% for the pure iron scaffold after 36 months implantation in rabbit abdominal aorta (p < 0.05). The Fe-based scaffold showed good long-term biocompatibility in both rabbit and porcine model. Its insoluble corrosion products were demonstrated biosafe and could be cleared away by macrophages from in situ to adventitia to be indiscernible by Micro Computed Tomography and probably finally enter the lymphatics and travel to lymph nodes after 53 months implantion in porcine coronary artery. The results indicate that the nitrided iron scaffold with further improvements shall be promising for coronary application.Statement of SignificancePure iron as a potential bioresorbable material has major disadvantages of slow corrosion and bioresorption. However, so far, there are neither quantitative data of long-term in vivo corrosion nor direct experimental evidence for bioresorption of pure iron and its alloys. Only this work systemically investigated long-term in vivo corrosion behavior and biocompatibility of a nitrided iron coronary scaffold up to 53 months after implantation and explored its bioresorption mechanism. These are fundamental and vital for developing novel Fe-based alloys overcoming the intrinsic drawbacks of pure iron. Novel testing and section-preparing methods were also provided in this work to facilitate future research and development of novel Fe-based alloy scaffolds. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Characterization and in Vivo Evaluation of a Bio-Corrodible Nitrided Iron Stent

Long-Term in Vivo Corrosion Behavior, Biocompatibility and Bioresorption Mechanism of A Bioresorbable Nitrided Iron Scaffold

Long-term safety and absorption assessment of a novel bioresorbable nitrided iron scaffold in porcine coronary artery

Cytotoxicity and Its Test Methodology for a Bioabsorbable Nitrided Iron Stent

Design and Characterization of a Novel Biocorrodible Iron-Based Drug-Eluting Coronary Scaffold

Biosafety and Efficacy Evaluation of a Biodegradable Zn-Cu-Mn Stent: A Long-Term Study in Porcine Coronary Artery

In vivo degradation and endothelialization of an iron bioresorbable scaffold

A Novel High Nitrogen Nickel-free Coronary Stents System: Evaluation in a Porcine Model

Application of a novel intravascular stent prepared by metal powder injection molding in animals

Experimental-Study on the Occlusion of Arterial Blood-Flow by the Implantation of Nitinol Alloy Stents

Research Progress in Biodegradable Metals for Stent Application

Long-term in vivo study of biodegradable Zn-Cu stent: A 2-year implantation evaluation in porcine coronary artery.

A biodegradable metal‐polymer composite stent safe and effective on physiological and serum‐containing biomimetic conditions

[The in Vivo Thrombosis Evaluation for the Biodegradable Polymer Stent].

A novel biodegradable polymer coated,sirolimus-eluting stent: evaluation in a porcine coronary model

In vivo and in vitro analyses of the effects of a novel high-nitrogen low-nickel coronary stent on reducing in-stent restenosis.

Corrosion behavior and biocompatibility evaluation of a novel zinc-based alloy stent in rabbit carotid artery model.

Mechanical properties and in vivo performance of a novel sliding-lock bioabsorbable poly- p -dioxanone stent

Degradation behaviors and in-vivo biocompatibility of a rare earth- and aluminum-free magnesium-based stent

In vivo biocompatibility of a new hydrophobic coated Al/Al2O3 nanowire surface on stents

Safety of a novel biodegradable stent implanted in the coronary artery in a porcine model