Abstract:Structural evolution of two propylene 1-butene random copolymer (iPPBu) films with different initial crystalline morphology during uniaxial deformation were investigated by synchrotron wide-angle and small-angle X-ray scattering (WAXS/SAXS), Fourier-transform infrared (FTIR) spectroscopy. The iPPBu with α crystal crystallized via mesophase exhibits a nodular morphology, while melt-crystallized iPPBu exhibits a characteristic spherulitic structure. The initial crystalline morphology has been found to exert influence on the structural evolution of the samples, including cavitation, orientation behavior of molecular chains in crystalline and amorphous phases, the occurrence of mesophase, and reduction in crystallinity, etc. Compared with the iPPBu with spherulitic morphology, no obvious cavitation was observed around the yield point in iPPBu with nodular morphology. Moreover, the variation rate of crystallinity with respect to draw ratio is smaller in the iPPBu with nodular morphology. A plausible reason for the phenomenon is that the iPPBu with nodular morphology has the lower lateral extension of crystallites. The onset draw ratio (λ onset) of α-crystal-to-mesophase transition in sample with nodular morphology is larger than that in the sample with spherulitic morphology. The molecular chains tend to be aligned perpendicular to the stretching direction in iPPBu with spherulitic morphology around yield point. This is attributed to the bending and separation of the lamellae with the normal parallel to the tensile direction. However, this phenomenon is not observed in the iPPBu with nodular morphology. In the strain-hardening regime, the strain hardening modulus G p of iPPBu with nodular morphology is higher than that of iPPBu with spherulitic morphology, which results from the more cross-linking points and more tie chains in highly oriented the amorphous phase of the former. A deformation mechanism is proposed to understand the role played by the initial morphology of iPPBu based on the crystal transition, variation in crystallinity, cavitation, and orientation.

Living Lamellar Crystal Initiating Polymerization and Brittleness Mechanism Investigations Based on Crystallization During the Ring-Opening of Cyclic Butylene Terephthalate Oligomers

Synthesis and Thermomechanical and Rheological Properties of Biodegradable Long-Chain Branched Poly(Butylene Succinate-Co-Butylene Terephthalate) Copolyesters

Effect of Monomer Structure on Crystallization and Glass Transition of Flexible Copolyesters

Effect of Copolymerized Butylene Terephthalate Chains on Polymorphism and Enzymatic Degradation of Poly(Butylene Adipate)

Stretch-Induced Α-to-β Crystal Transition and Lamellae Structural Evolution of Poly(butylene Adipate-Ran-terephthalate) Aliphatic–Aromatic Copolyester

Facile Access To Carboxyl-Terminated Polybutadiene And Polyethylene From Cis-Polybutadiene Rubber

Tensile deformation mechanism of propylene-1-butene random copolymer: The role of initial crystalline morphology

Control of thermal cross-linking reactions and the degree of crystallinity of syndiotactic 1,2-polybutadiene

Entropically-Driven Ring-Opening Polymerization of Cyclic Butylene Terephthalate: Rheology and Kinetics

Manipulation of Chain Entanglement and Crystal Networks of Biodegradable Poly(butylene Adipate-Co-butylene Terephthalate) During Film Blowing Through the Addition of a Chain Extender: an in Situ Synchrotron Radiation X-ray Scattering Study.

Toughening mechanism in impact polypropylene copolymer containing a beta-nucleating agent

Ductile–brittle transition controlled by isothermal crystallization of isotactic polypropylene and its blend with poly(ethylene-co-octene)

Oriented Crystallization of Crosslinked Cis-1, 4- Polybutadiene

Study on Low Temperature Toughness and Crystallization Behavior of Polypropylene Random Copolymer

Temperature Dependence of Tensile Behavior in Poly(Butylene Terephthalate) with Different Crystallinity

The Formation of Crystal Cross-Linked Network in Sequential Biaxial Stretching of Poly(ethylene Terephthalate): the Essential Role of MD Pre-Stretch

Stretch-induced crystalline structural evolution and cavitation of poly(butylene adipate-ran-butylene terephthalate)/poly(lactic acid) immiscible blends

Crystallization and Microphase Morphology of Side-Chain Cross-Linkable Poly(3-hexylthiophene)-block-poly[3-(6-hydroxy)hexylthiophene] Diblock Copolymers

Electrical and Mechanical Properties of Short-Carbon-Fiber Reinforced Polymerized Cyclic Butylene Terephthalate Composites

Structural Evolution and Toughening Mechanism of Β-Transcrystallinity of Polypropylene Induced by the Two-Dimensional Layered Interface During Uniaxial Stretching

Crystallization and Melting Behavior of Biodegradable Poly(Butylene Succinate-Co-Butylene Carbonate)