Abstract:Carbon nanotube/continuous carbon fiber reinforced poly(ethylene terephthalate) (CNT/CCF/PET) composites are prepared by melt impregnating. The effects of CF and CNT content on the mechanical properties, melt and crystallization behaviors, and submicroscopic morphology of CNT/CCF/PET composites are studied. The tensile test results show that the increase of CF and the addition of appropriate amount of CNT improved the tensile strength and tensile modulus of the composites. When the content of CNT is 1.0 wt% and the content of CF is 56 wt%, the properties of the composites are the best, with tensile strength of 1728.7 MPa and tensile modulus of 25.1 GPa, which is much higher than that of traditional resin matrix composites. The results of dynamic mechanical analysis (DMA) show that the storage modulus of the composites increased with the increase of CF and CNT content. In particular, the addition of CNT greatly reduced the loss modulus of the composites. Morphological analysis show that the addition of CNT improved the fiber–matrix interface of the composite, which changes from fiber pull-out and fracture failure to fiber matrix fracture failure, and the fiber matrix interface is firmly bonded. In addition, there are polymer coated CNT protrusions on the surface of the fiber was observed. The results of differential scanning calorimetry (DSC) show that the melting temperature and crystallization temperature of the composites increased with the increase of CF content. The addition of CNT had little effect on the melting temperature of the composites, but it further improved the crystallization temperature of the composites. The effect of CNT content on the crystallization kinetics of the composites is studied. The non-isothermal crystallization kinetics of the composites is described by Jeziorny's improved Avrami equation. The results show that CNT has a great influence on the crystallization type of the composites. As a nucleating agent, CNT has obvious heterogeneous nucleation effect in the composites, which improves the crystallization rate of PET.

Electrical and Mechanical Properties of Short-Carbon-Fiber Reinforced Polymerized Cyclic Butylene Terephthalate Composites

Preparation and Research of Thermally Conductive PBT/CF Composites

Rheological, thermal, and mechanical properties of phosphorus-containing wholly aromatic thermotropic liquid crystalline polymer-filled poly(butylene terephthalate) composites

Percolation behavior and sensing performance of polypropylene‐based conductive polymer composites under compressive strains and temperature

Mechanical Properties, Melting and Crystallization Behaviors, and Morphology of Carbon Nanotubes/Continuous Carbon Fiber Reinforced Polyethylene Terephthalate Composites

Complementary Percolation Characteristics of Carbon Fillers Based Electrically Percolative Thermoplastic Elastomer Composites

Conductivity and piezoresistivity of conductive carbon black filled polymer composite

PLA/CB and HDPE/CB conductive polymer composites: Effect of polymer matrix structure on the rheological and electrical percolation threshold

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Enhancing the Electrical Conductivity of Carbon Black-Filled Immiscible Polymer Blends by Tuning the Morphology

Effect of Modified Carbon Nanotube on the Thermal Behavior, Flame Retardancy and Mechanical Properties of Poly(1,4-Butylene Terephthalate)/Aluminum Phosphinate Composites

Tunable Electrical Conductivity Of Carbon-Black-Filled Ternary Polymer Blends By Constructing A Hierarchical Structure

Poly(ethylene Terephthalate)/carbon Black Composite Fibers Prepared by Electrospinning

Microstructure of Carbon Nanotubes/pet Conductive Composites Fibers and Their Properties

Electrical conductivities of carbon nanotube-filled polycarbonate/polyester blends

The Effect of Hybrid Thermal Fillers on Thermal Conductivity of Carbon Fiber Reinforced Polybutylene Terephthalate Composites

Electrical conductivity and rheological properties of carbon black based conductive polymer composites prior to and after annealing

Electrical Properties and Crystallisation Behaviour of Polypropylene/Carbon Black Composites

Electrical properties and morphology of polypropylene/epoxy/glass fiber composites filled with carbon black

Special Electrical Conductivity of Carbon Black‐filled Two‐phased Thermoplastic Vulcanizates

Temperature Dependence of Electrical Resistivity for Carbon Black Filled Ultra-High Molecular Weight Polyethylene Composites Prepared by Hot Compaction