Abstract:Analytical fragility analyses are conducted to investigate the impact of seismic design level on the seismic performance of RC moment-resisting frame buildings designed according to the provisions of the current Chinese seismic code. Four groups of buildings of low-to-mid height (3, 5, 8, and 10 stories) are studied, each of which accounts for diverse levels of seismic design, namely, precode, low code, medium code, and high code. Fragility relationships are derived for each building using nonlinear time-history analyses with 100 real ground-motion records. The results show that the buildings designed for a higher seismic code level exhibit less fragility as improving the seismic design level leads to a raised fragility median and a reduced fragility dispersion. Data on the reference seismic hazards with the probabilities of exceedance of 10 and 2-3% in 50 years show that almost all the buildings can satisfy the performance requirements of reparability and no collapse, respectively. However, the damage limitation performance objective, which is associated with 63.2% in 50-year hazard, cannot be satisfactorily achieved by medium-code and high-code buildings. The enhancement of structural resistance caused by the improvement of seismic design level is counteracted by the simultaneously increased seismic action; therefore, the limit-state probabilities of the buildings at the corresponding reference earthquakes are not decreased but increased accordingly. The current Chinese seismic design code seems conservative because the buildings show marginal potential of suffering serious damages endangering life when subjected to the seismic hazard level higher than it was designed for. Thus, it is possible to account for larger anticipated nonlinear behavior in the definition of seismic design force. (C) 2017 American Society of Civil Engineers.

Seismic performance analysis for low-ductile R.C. frame structures based on IDA method

Seismic Performance Analysis and Evaluation for Low-Ductile RC Frame Structures

Composition of Structural Behavior Factors in Codes of China, Japan,Europe and USA for Earthquake-Resistance and Their Corresponding Ductility Demands

Seismic Performance Factors of RC Frames with Infilled Walls Based on APOA and IDA

STUDY ON THE COLLAPSE-RESISTANT CAPACITY OF RC FRAMES WITH DIFFERENT SEISMIC FORTIFICATION LEVELS

Influence of Structural Parameters to the Seismic Collapse Resistance of RC Frames in 7-degree Seismic Fortification Zone

Relating Seismic Design Level and Seismic Performance: Fragility-Based Investigation of RC Moment-Resisting Frame Buildings in China

Evaluation of China's Seismic Design Codes on Preventing Seismic Collapse of RC Frames

REFINED ASEISMIC ANALYSIS OF LOW-DUCTILITY RC FRAME BUILDING BASED ON NUMERICAL SUBSTRUCTURE METHOD

Ductility Reduction Factor Analysis of RC Frames Considering Influences of Infilled Walls

Seismic Loss Assessment of Typical RC Frame-Core Tube Tall Buildings in China and US Using the FEMA P-58 Procedure

Introduction of design method for RC structures under severe earthquake in Japan

A Comparative Case Study on Seismic Design of Tall Rc Frame-Core-Tube Structures in China and Usa

Seismic Risk Assessment for A Reinforced Concrete Frame Designed According to Chinese Codes

COMPARISON OF SEISMIC DESIGN OF HIGH-RISE RC FRAME-CORE TUBE STRUCTURE BETWEEN CHINA AND AMERICA

Seismic Performance Analysis and Evaluation Method of RC Infilled Frame

Analysis of the damage mechanism of a typical RC frame in Wenchuan Earthquake

Seismic Collapse Resistance of RC Frame Structures——case Studies on Seismic Damages of Several RC Frame Structures under Extreme Ground Motion in Wenchuan Earthquake

Seismic loss comparison of typical high-rise buildings in China and USA using the new-generation performance-based design method

Probabilistic Seismic Safety Assessment of Chinese RC Frame Structures Using Fragility Curves

SEISMIC DAMAGE FIELD OBSERVATION AND VULNERABILITY ANALYSIS OF MULTILAYER REINFORCED CONCRETE FRAME STRUCTURE