Abstract:Large-diameter monopiles are the predominant foundation solution for supporting offshore wind turbines. They are conventionally designed using soil reaction curves developed for long slender piles used for supporting offshore oil and gas platforms (e.g., the API p-y model). However, due to the difference in the length/diameter ratio and the resulting soil mechanisms, the use of p-y curves alone can lead to significant under-prediction of the lateral stiffness and capacity of monopiles. To overcome the shortcoming, the authors have previously proposed a conceptual two-spring framework, i.e., the so-called 'p-y + M-R-theta(R)' model, to capture the monopile response in soft clay under lateral loading. The framework uses distributed p-y springs to consider the lateral soil resistance along the pile above the rotation point (RP) and a single moment-rotation (M-R-theta(R)) spring attached at the RP to capture the entire soil resistance below the RP, i.e., the distributed resistance along the pile, base shear and base moment at the pile tip. The proposed p-y and M-R-theta(R) springs were curve-fitted to the results of 3D numerical analyses. However, as the stress-strain response and the shear strength profile inevitably influence the p-y and M-R-theta(R) springs, the applicability of the empirical formulations to soil conditions other than those examined is uncertain. This study proposes an enhancement to the 'p-y + M-R-theta(R)' framework, in which the p-y and M-R-theta(R) springs are not tied to a specific soil and strength profile but fundamentally linked to the properties that can be measured directly in the site investigation and laboratory. This extension is achieved through analytical analyses and an extensive parametric numerical study. The predictive capabilities of the model are demonstrated by back-analyses of finite element analyses and centrifuge model tests. The proposed model provides practising engineers with a simple yet powerful approach to use site-specific soil reaction curves in the design of monopiles embedded in soft clay.

Lumped-parameter model of foundations based on complex Chebyshev polynomial fraction

Study on Lumped-Parameter Model of Surface Circular Foundation

LUMPED-PARAMETER MODELS FOR FOUNDATIONS BASE ON CHEVSHEV COMPLEX POLYNOMIALS-FRACTION

Lumped-parameter Model of Pile Group Impedance Function

Nested Lumped-Parameter Model for Foundation with Strongly Frequency-dependent Impedance

ESTABLISHMENT OF THREE DIMENSIONAL COMPOSITE MODEL AND ITS APPLICATION TO COMPOSITE FOUNDATION WITH GRANULAR PILES

BEM-ALEM Modeling of Plate–Soil Interaction for Rigid Circular Foundation in Layered Saturated Soils Subjected to Mechanical or Thermal Load

A Simplified Planar Model for Geosynthetics Reinforced Composite Foundation Subjected to Vertical Load

Simplified Analysis Method for Evaluating Horizontal Deformation of Single Pile Due to Adjacent Foundation Pit Excavation

A kind of approximate method for nonlinear collaboration analysis of quasi-rigid foundation-piles-soil system

Simplified Method for Calculating Ground Lateral Displacement Induced by Foundation Pit Excavation

Settlement of composite ground reinforced by deformable piles

Practical Method for the Pile Composite Ground under Flexible Foundation Based on Super-Substructure Interaction

3-D Numerical Simulation for Large-Diameter Cast-<i>In Situ</i> Tubular Pile

A Unified Lateral Soil Reaction Model for Monopiles in Soft Clay Considering Various Length-to-diameter (L/D) Ratios

A simplified three-parameter model for analyzing torsional vibration of rectangular foundations on layered soil

A Lump- Parameter Model for the Large Dynamic Machine Foundation -Soil System

Site-specific soil reaction model for monopiles in soft clay based on laboratory element stress-strain curves

New Interaction Model for the Annular Zone of Stepped Piles with Respect to Their Vertical Dynamic Characteristics

A discrete model for dynamic structure-soil-structure interaction systems with embedded foundations

Numerical analysis on the performance of a cushioned foundation with a mixture of both rigid and flexible piles