Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Nanohole Induced Microfiber Bragg Gratings.

Compact Microfiber Bragg Gratings with High-Index Contrast

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Nanoimprinted Polymer Micro/Nanofiber Bragg Gratings for High-Sensitivity Strain Sensing

Mid-infrared microfiber Bragg gratings

A Fully-Encircled Polymerized Microfiber Bragg Grating by 3D Femtosecond Laser Nanofabrication

Nanoscale morphology and thermal properties of low insertion loss fiber Bragg gratings produced using the phase mask technique and a single femtosecond laser pulse

Fiber Bragg gratings inscribed in nanobore fibers.

High Fluence Krf Excimer Laser Fabricated Bragg Grating in A Microfiber

Investigation of the Fiber Bragg Grating Inscribed in Multimode Fiber by Femtosecond Laser

Optimized Optical Tunable Microfiber-Bragg Grating

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Temperature-insensitive Nanobore Fiber Bragg Grating

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

LASER DIRECT WRITING OF LONG PERIOD FIBER GRATING BY 800 NM FEMTOSECOND LASER PULSES

Femtosecond laser fabrication of long period fiber gratings and applications in refractive index sensing

Fabrication of Long-Period Fibre Gratings Using 800 Nm Femtosecond Laser Pulses

Fibre Bragg Gratings Inscribed in Homemade Microstructured Fibres

Nanofibers with Bragg gratings from equidistant holes

Compact Long-Period Fiber Gratings Based on Periodic Microchannels