Abstract:A three-dimensional fluid model is developed to investigate the radio-frequency inductively coupled H2 plasma in a reactor with a rectangular expansion chamber and a cylindrical driver chamber, for neutral beam injection system in CFETR. In this model, the electron effective collision frequency and the ion mobility at high E-fields are employed, for accurate simulation of discharges at low pressures (0.3 Pa–2 Pa) and high powers (40 kW–100 kW). The results indicate that when the high E-field ion mobility is taken into account, the electron density is about four times higher than the value in the low E-field case. In addition, the influences of the magnetic field, pressure and power on the electron density and electron temperature are demonstrated. It is found that the electron density and electron temperature in the xz-plane along permanent magnet side become much more asymmetric when magnetic field enhances. However, the plasma parameters in the yz-plane without permanent magnet side are symmetric no matter the magnetic field is applied or not. Besides, the maximum of the electron density first increases and then decreases with magnetic field, while the electron temperature at the bottom of the expansion region first decreases and then almost keeps constant. As the pressure increases from 0.3 Pa to 2 Pa, the electron density becomes higher, with the maximum moving upwards to the driver region, and the symmetry of the electron temperature in the xz-plane becomes much better. As power increases, the electron density rises, whereas the spatial distribution is similar. It can be summarized that the magnetic field and gas pressure have great influence on the symmetry of the plasma parameters, while the power only has little effect.

Numerical Simulation of Energy Deposition and Extraction Efficiency of the Volume Produced Negative Hydrogen Ions

Numerical simulation studies on negative hydrogen ion source for uniformity of H - ion beam

The MCC numerical algorithm of the extraction of the surface-produced negative hydrogen ions

3D Simulation of the Electron Energy Distribution in Negative Hydrogen Ion Source

A three-dimensional particle-in-cell/Monte Carlo computer simulation based on negative hydrogen ion source

Three-dimensional simulation of electron extraction process and optimization of magnetic field based on multi-aperture structure of negative hydrogen ion source

Numerical Simulation Research of Plasma Characteristics in a Multi-Cusp Proton Source Based on Magnets Layout

3D Fluid Model Analysis on the Generation of Negative Hydrogen Ions for Negative Ion Source of NBI

A Full Three-Dimensional Numerical Diagnosis of Japan Atomic Energy Agency 10 Ampere Multi-Cusp Negative Hydrogen Ion Source

Numerical Investigation of Radio-Frequency Negative Hydrogen Ion Sources by a Three-Dimensional Fluid Model*

Enhancing ion extraction with inverse sheath in negative hydrogen ion sources for NBI heating

Enhancing Ion Extraction with an Inverse Sheath in Negative Hydrogen Ion Sources for NBI Heating

Numerical study of the plasma meniscus shape and beam optics in RF negative ion sources

Experimental study on plasma characteristics in the extraction region of a high-power RF negative ion source based on electrostatic probe

Gas Flow Influence on Negative Hydrogen Ion Generation Within the Microwave-Driven Negative Ion Source

The Full Three-Dimensional Electromagnetic Pic/Mcc Numerical Algorithm Research of Penning Ion Source Discharge

Study on the Plasma Parameters of RF Negative Ion Source for Associated Particle Neutron Generator

Investigation of the Power Transfer Efficiency in a Radio-Frequency Driven Negative Hydrogen Ion Source

Influence of Magnetic Filter Field on the Radio-Frequency Negative Hydrogen Ion Source of Neutral Beam Injector for China Fusion Engineering Test Reactor

Experimental and Simulation Study on the Backstreaming Positive Ions on the Quarter-Size Negative Ion Source for CRAFT NNBI Test Facility

Numerical analysis of isotope effect in NIFS negative ion source