Abstract:Material response and the launch of laser plasma during the 1064 nm nanosecond laser pulse induced damage to the exit surface of fused silica are investigated. Employing a polarization-based two-frame shadowgraphy setup with ～ 60 fs probing resolution, the transient material responses from the rising part of nanosecond pumping pulse to several hundred nanosecond timescale are captured. Using a shearing interferometry setup, the evolution of transient phase shift of laser plasma in the expansion process to the ambient air is also investigated. Inhomogeneous distribution of phase shift caused by the electrons and neutrals in the plasma is quantitatively resolved by employing the fast Fourier transform based filtering algorism. To demonstrate the evolutions of important plasma parameters such as pressure, temperature and density, a continuum hydrodynamic model is numerically solved. The initial pressure of plasma is estimated according to the point-explosion model, and the initial plasma temperature is achieved by calculating the difference between simulating shockwave front radius and experimental value at the same delay. The optimal temperature is chosen when the radius difference is minimal. Main conclusions are as follows. 1) Abundant suprathermal electrons are excited in the early energy deposition process. Part of these electrons contribute to the thermal transport process and produce the laser supported solid-state absorption front (LSSAF) which propagates into the bulk silica. Other electrons escape to the air side and contribute to the formation of air plasma through the impact ionization process. Plasma expansion speed is about 20 km/s during this phase. 2) When the pump pulse is terminated, the LSSAF and air plasma lose their energy supplied and experience a rapid decline of the temperature and expansion velocity. As a result, the final damage crater depth exhibits seldomly no increase compared with the transient crater depth during this phase. Hot bulk plasma formed in this phase becomes the damage precursor and induces the ejection of abundant neutrals probably due to the phase explosion mechanism. Inhomogeneous distribution of stress is formed by Rayleigh-Taylor instability at the interface between hot bulk plasma and surrounding bulk material during the expansion of LSSAF. Radial and circumferential cracks are formed due to the release of stress. 3) Evolution of air plasma follows the conventional evolution process of laser-induced plasma, i. e. , internal pressure, temperature and density decrease quickly with time delay. The simulated transient highest pressure is about 600 MPa. Simulation also predicts the formation of the internal shockwave. Our work will be helpful in understanding the laser damage mechanism of the fused silica optical window.

Role of lens to sample distance during laser-induced damage in zinc targets

The mechanism of effect of lens-to-sample distance on laser-induced plasma

Effect of Focus Position of Ns Pulse Laser on Damage Characteristics of K9 Glass

Laser-induced damage thresholds of ultrathin targets and their constrain on laser contrast in laser-driven ion acceleration experiments

Laser-induced damage thresholds of ultrathin targets and their constraint on laser contrast in laser-driven ion acceleration experiments

Dynamics of Femtosecond Laser Pulse Induced Damage in Multilayers

Laser-Induced Damage Initiation and Growth of Optical Materials

Experimental and Computational Study of Damage Pocess Induced by 1064 Nm Nanosecond Laser Pulse on the Exit Surface of Fused Silica

Femtosecond Laser Pulse Induced Damage In Thin Films - Art. No. 60281d

Characterization of 355 Nm Laser-Induced Damage of Mitigated Damage Sites in Fused Silica

Study On The Morphology Of Laser Induced Damage In K9 Glass By Focused Nanosecond Pulse

Femtosecond Laser-Induced Damage and Ultrafast Dynamics in Highs Reflection Coating

Role of focusing distance in picosecond laser-induced Cu plasma spectra

Influence of Defocusing Distance on Mechanical Effect of Plasma Shock Wave Induced by Laser

Influence of lens to samples distance on laser-induced breakdown spectroscopy measurement

Influence of laser focusing position on damage of K9 glass

Dynamics of filamentary damage induced by nanosecond laser in fused silica

Damage morphology and mechanism in ablation cutting of thin glass sheets with picosecond pulsed lasers

Temporal-spatial Dynamics of Electronic Plasma in Femtosecond Laser Induced Damage.

Transient Dynamic Behavior During Nanosecond Laser-Induced Damage Initiated by Surface Defects on KDP Crystals with Simulation and Experimental Method

Laser-induced Damage Growth of Fused Silica at 351 Nm on a Large-Aperture High-Power Laser Facility