Abstract:A 3D broad-band and wide-angle absorber (3D BWA) was designed through a 3D resistive metamaterial in which a traditional magnetic absorbing material was added on top of the metallic backplane. Owing to the better magnetic loss performance of the magnetic absorber at lower frequencies and superior impedance matching effect and ohmic loss property of the resistive films at higher frequencies, the absorption can be extended to a wider band through their combination. Simulation result shows that the absorption of the 3D BWA is more than 90% in the frequency range of 3.7-40 GHz at normal incidence, and it is in accordance with the experimental result. The absorption performance for each part of the 3D BWA was analyzed using electric field and magnetic field distributions, surface current distributions and Smith chart. For TE polarized waves of 3.7-40 GHz, the absorption with the incident angles of 0 degrees-60 degrees is more than 77%. The absorption higher than 80% can be achieved under TM polarized waves of 4.2-40 GHz as the incident angle changes from 0 degrees to 60 degrees. When the incident angle is 70 degrees, the absorption is greater than 85% in the frequency range of 5.7-40 GHz. Owing to the four-fold rotationally symmetric unit cell structure, the absorption spectrum under different polarization angles remains unchanged. These two characteristics make the designed absorber a good candidate in stealth applications.

A Wideband Metamaterial Absorber Based on a Magnetic Resonator Loaded with Lumped Resistors

Design of A Wide-Band Metamaterial Absorber Based on Loaded Magnetic Resonators

Broadband Metamaterial Absorber with an In-Band Metasurface Function.

Magnetic Medium Broadband Metamaterial Absorber Based on the Coupling Resonance Mechanism

Design of a High-Efficient Metamaterial X-band Absorber Composed of a Dielectric Cylinder Combined with a Thin Magnetic Cylinder Unit

A low-profile metamaterial absorber with ultrawideband reflectionless and wide-angular stability

Design and Analysis of Lumped Resistor Loaded Metamaterial Absorber with Transmission Band

Extremely Wideband Metamaterial Absorber Using Spatial Lossy Transmission Lines and Resistively Loaded High Impedance Surface

Broadband metamaterial absorber based on a multi-layer structure

Wideband Metamaterial Absorbers Based on Conductive Plastic with Additive Manufacturing Technology

Asymmetric Three-Dimensional Metamaterial Absorber for Microwave Application

Dual-polarized Bidirectional Three-Dimensional Metamaterial Absorber with Transmission Windows

Wideband Absorption at Low Microwave Frequencies Assisted by Magnetic Squeezing in Metamaterials

Design Of 3d Broad-Band And Wide-Angle Absorber Based On Resistive Metamaterial And Magnetic Absorbing Material

Dual-Band, Polarization-Insensitive, Ultrathin and Flexible Metamaterial Absorber Based on High-Order Magnetic Resonance

Ultra-Broadband and Polarization-Insensitive Metamaterial Absorber Based on Frequency Selective Surface

A Light Weight and Broadband Metamaterial Absorber with 3d Cube Unit Cells

An Ultra-Wideband Metamaterial Absorber With Active Frequency Selective Surface

Low frequency absorption properties of a thin metamaterial absorber with cross-array on the surface of a magnetic substrate

A Broadband Metamaterial Microwave Absorber Utilizing Both Magnetic and Electric Resonances

Three-Dimensional Resistive Metamaterial Absorber Loaded with Metallic Resonators for the Enhancement of Lower-Frequency Absorption